Round Tube
- Minimum Outside Diameter (OD): 1/2" (12.7 mm)
- Maximum Outside Diamter (OD): 2-1/2" (63.5 mm)
- Minimum Wall Thickness: Depends on Die
- Maximum Wall Thickness: 0.134" (3.4 mm)
Pipe
- Minimum Size: NPS 1/4 (DN 8)
- Maximum Size: NPS 2 (DN 50)
- Note: Our benders are rated for bending mild steel Schedule 40 Pipe. For other materials or Schedules, contact for details.
Square Tube
- Minimum Size: 3/4" (19.1 mm)
- Maximum Size: 1-1/2" (38.1 mm)
- Minimum Wall Thickness: 0.065" (1.7 mm)
- Maximum Wall Thickness: 0.125" (3.2 mm)
Other Specifications
- Minimum Centerline Radius (CLR): Approx. 3 x OD
- Maximum Centerline Radius (CLR): 7" (177.8 mm)
- Maximum Degree of Bend: 180 degrees, depending on the die
