Reviews

Fits flush all the way around, no gap at the top edge like the last aftermarket one I tried

Jace C. — Yamaha Wolverine Full Windshield

Full enclosure held up through a week of rain camping, no leaks anywhere, seams are sealed well

Kyle C. — Honda Talon Full Cab Enclosure

Does the job well, just wish the mounting instructions had better diagrams

Grant C. — Yamaha Viking Snow Plow Kit

Optically clear, zero waviness looking through it even at highway speeds. Seals up tight, no whistling

Corey N. — Yamaha Wolverine Full Windshield

These doors are night and day compared to stock plastic. My kids stopped complaining about mud getting in

Zach G. — CF Moto U10 Pro Convertible Full Hard Door Kit

Cuts dust down a good bit, still get some coming through around the back window seam on real dusty days

Dean J. — Polaris Ranger Cab Enclosure

Works but the fan is louder than I'd like on the high setting

Heath J. — CF Moto Cab Heater Kit

Install video on youtube made this a 45 min job. Fit is tight, no wind noise at highway speed either

Travis K. — CF Moto U10 Pro Convertible Full Hard Door Kit

Took longer to figure out the install than I expected, directions could be better but it works

Derek S. — Polaris Ranger Cab Enclosure

This is the AJK bumper Trailworx pointed me to when the EMP one I wanted was backordered, glad they did, quality is great

Adam T. — AJK Offroad Kawasaki Ridge Rear Bumper

Easy clamp-on install, no tools needed, and they fold in nice when trailering

Blake C. — Can-Am Commander Side Mirrors

Ordered this after my stock bumper got wrecked, fit was spot on and paint matches close enough you can't tell

Kevin B. — CF Moto Uforce 1000 Rear Bumper

Works fine but assembly took way longer than the listing suggested

Craig F. — Yamaha Viking Snow Plow Kit

Good mirrors, mounting hardware included was slightly undersized for my roll cage diameter so I swapped bolts

Brent P. — Can-Am Commander Side Mirrors

Took me a full Saturday but instructions were clear and torque specs were included, no guessing

Scott B. — Polaris RZR Lift Kit 3-inch

Does a good job blocking dust, took a minute to get the straps adjusted evenly on both sides

Shane S. — Honda Pioneer 500/520 Cab Back Dust Stopper

Hit a stump pretty good last month and it just scuffed the paint. Saved my radiator for sure. Would buy again

Quinn T. — Can-Am Defender Rear Heavy Duty Steel Bumper

Good protection, install was a little fiddly getting all the bolts to line up but manageable

Ethan B. — Can-Am Maverick Skid Plate

Good clearance gain, noticed a little more bump steer on washboard roads until I had the tie rods adjusted

Chase L. — Polaris RZR Lift Kit 3-inch

Angle adjustment is quick even with gloves on, made clearing our driveway way faster

Tony E. — Yamaha Viking Snow Plow Kit

Tough plastic, flexes instead of cracking when I clip a tree. Wish I'd bought these a year ago

Seth M. — Kawasaki Ridge Fender Flares

No more mud slinging up into the cab area, these fit tight to the body with zero rattle even at speed

Jon M. — Kawasaki Ridge Fender Flares

They work but one of the mirror heads was a little loose out of the box

Wyatt B. — Can-Am Commander Side Mirrors

We ride a lot of sandy trails and this has cut the dust in the cab down probably 90%. Wife is much happier now

Owen G. — Honda Pioneer 500/520 Cab Back Dust Stopper

Solid plate, just heavier than I expected, took two of us to hold it in place while bolting up

Clint B. — Can-Am Maverick Skid Plate

Good glass, install took a bit longer than expected getting the seal to sit right but happy with it

Rusty N. — Yamaha Wolverine Full Windshield

Good bumper, shipped next day like they said, just wish it came with a spare set of hardware in case you drop a bolt in the dirt

Cody N. — AJK Offroad Kawasaki Ridge Rear Bumper

Good doors overall. The latch takes a little getting used to, has to be pulled just right or it won't catch

Isaac K. — CF Moto U10 Pro Convertible Full Hard Door Kit

Cleared up room for 30s no rubbing at all. Ride is still smooth, didn't feel harsh like I worried it would

Colby E. — Polaris RZR Lift Kit 3-inch

Pushed a foot of wet snow no problem, mount didn't budge once all winter

Cory R. — Yamaha Viking Snow Plow Kit

Color's a hair darker than what showed on my screen but not a big deal, fit is good

Jesse K. — Kawasaki Ridge Fender Flares

Fit is okay, had a little gap on one corner, called support and they walked me through fixing it

Frank A. — Yamaha Wolverine Full Windshield

Fits well, just had to loosen and re-torque the mounting bolts once after the first few rides to stop a small rattle

Trey E. — Polaris Ranger Front Brush Guard

welds are clean, powder coat hasn't chipped even after a winter of salt and mud. good bumper

Nolan S. — Kawasaki Ridge Heavy Duty Rear Bumper

Heats up well once running, just takes a couple minutes longer to get hot than I expected

Ray A. — CF Moto Cab Heater Kit

Game changer for early morning hunts, cab is warm in about 5 min even in freezing temps

Walt H. — CF Moto Cab Heater Kit

Does what it says but shipping took almost 3 weeks which wasn't great

Garrett R. — Polaris RZR Lift Kit 3-inch

It's fine. Does the job but the mounting brackets felt a little thin for how heavy the bumper itself is

Phil C. — Can-Am Defender Rear Heavy Duty Steel Bumper

Looks good and feels heavy duty, one bolt hole was slightly off center but still bolted up fine with a little persuasion

Eli F. — CF Moto Uforce 1000 Rear Bumper

Had to trim one slightly where it was rubbing the tire on full turn, otherwise fine

Miles C. — Kawasaki Ridge Fender Flares

Kept us bone dry in a surprise rainstorm last weekend. Zipper's held up fine so far too

Randy G. — Polaris Ranger Cab Enclosure

Solid bumper, just took me almost 2 hrs to install by myself because the bolt holes didn't line up perfect on one side

Wes H. — Kawasaki Ridge Heavy Duty Rear Bumper

been through 2 seasons of rock crawling and this thing still looks brand new. no bends no rust

Dale W. — Kawasaki Ridge Heavy Duty Rear Bumper

Dragged it across a rock ledge I probably shouldn't have and it just scraped, no dents no cracks

Lane D. — Can-Am Maverick Skid Plate

Pushed through some thick brush this weekend and it did exactly what it's supposed to, no scratches on the hood

Todd A. — Polaris Ranger Front Brush Guard

Coverage is way better than stock, protects the whole belly not just the middle section

Tanner W. — Can-Am Maverick Skid Plate

Vibration is way less than stock, actually usable at speed now instead of just a blur

Glenn H. — Can-Am Commander Side Mirrors

Was skeptical for the price but the steel gauge on this is way thicker than I expected. Direct bolt on, no drilling.

Reid D. — Can-Am Defender Rear Heavy Duty Steel Bumper

Fit is decent but one door had a slight warp out of the box, had to leave it in the sun to straighten

Levi E. — CF Moto U10 Pro Convertible Full Hard Door Kit

Good coverage overall, the door zippers snag a little if you're not careful lining them up

Jared N. — Honda Talon Full Cab Enclosure