DynoJet Power Vision CX Tuner with BMP Custom Tuning for RZR RS1
Device Features:
- Flash performance tunes via OEM diagnostic connector, no need to remove and send out ECU
- Display vehicle data channels in real-time
- Weather resistant for use in all conditions
- High contrast display, visible in direct sunlight
BMP Performance Tunes:
- Fueling revised for maximum power and torque - extreme horsepower gains with our highly advanced custom tuning!
- Spark timing optimized for 91 octane fuel
- Rev limit raised in high and low gears to 9000 RPM
- Speed limit raised in high and low gears to 96 MPH
- Torque limiting functions reduced or eliminated
- Throttle limiters eliminated
- Revised drive-by-wire throttle profiles for high and low gears
- Lower fan turn-on temps of 183 degrees
- Seat belt limiter disabled
- Left foot brake mode enabled
- No overboost codes
- Retains ADC and Turf mode where applicable
RZR RS1 Tuning Info
The DynoJet 3 tuner and BMP custom tunes are the most lethal combination ever brought to the RZR world! We have extensively tested with the RZR RS1 to make the most horsepower possible using our state of the art dyno center. All of our tunes feature a locked throttle by wire along with a raised rev limiter, raised speed limiter, optimized timing curve, optimized boost map and optimized fuel curve. We offer various levels of tuning to best suite your needs.
RZR RS1 Tunes Currently Available:
Stock Optimized - 91 Octane 82 RWHP (Stock levels with limiters raised and/or removed)
Level 1 - 91 Octane 92 RWHP (+10 RWHP over stock) *BMP Exhaust Recommended
All horsepower levels are with the recommended BMP Slip-On Exhaust & BMP Stage 2 Clutch Kit
Baseline for a stock RZR RS1 was 80-82 RWHP
