Can-Am Defender & Defender MAX HD10 Snow Plow Mount, 3/16" Hand-Welded Steel, Quick-Connect Pins, No-Drill OEM Mounting Points

A plow is only as good as the mount that holds it to the machine. This Can-Am Defender HD10 snow plow mount bolts to factory mounting points under the front of the machine and gives a Plow Pro blade a solid, square place to push from, so clearing the driveway, the barn lot or the shop entrance becomes a quick chore instead of a shovel workout.

Highlights

• 3/16" steel plate, hand-welded for strength
• Quick-connect pins put the plow on or take it off in minutes
• Bolts to the Defender's OEM mounting points, no drilling
• Small, low profile design that can stay on the machine all winter
• Made for Plow Pro snow plow blades

Built for Heavy, Wet Snow

Pushing a full blade of wet snow puts a lot of force into the mount and the frame behind it. This one is cut from 3/16" steel and welded by hand, so it holds the push tube steady when the blade hits a frozen ridge at the end of the drive. Using the factory mounting points spreads that load into the chassis where Can-Am designed it to go.

On in Minutes, Off Just as Fast

The quick-connect pins are the part you'll appreciate most on a cold morning. Drive up to the plow, line it up, drop the pins in and go to work. When the storm is over, pull the pins and park the blade. Because the mount is compact and tucked up under the machine, most owners simply leave it on from the first snow to the spring thaw without it catching on anything.

Works With Plow Pro Blades Only

This mount is designed around the Plow Pro push tube, so it will not accept other brands of plow frames. If you're starting from scratch, look at the complete plow kits for the Defender, which include the blade, push tube and mount together.

What's in the Box

• Snow plow mount
• Quick-connect pins
• Mounting hardware
• Instructions

Who It's For and What Pairs Well

For Defender HD10, Defender MAX HD10 and Defender 6x6 owners who already run a Plow Pro blade, or who want a spare mount for a second machine. Find blades and complete kits in Can-Am Defender snow plows, and a winch to lift the blade in Defender recovery gear and winches.

Fitment

Note: Compatible with Plow Pro Snow Plow blades only

Installation Notes

The mount bolts to the factory mounting points with basic hand tools and no drilling. A winch is the usual way to raise and lower the blade, so plan for one if your machine doesn't have it. Instructions are linked below.

• Installation instructions (SPM-CA-DEF-001, PDF)