Can-Am Maverick X3 Brake Lock, Padlock Compatible Parking Brake, 1/8" Steel

Park a Maverick X3 on a hill and the whole weight of the machine sits on the transmission's park mechanism, which is why shifting out of park on a slope can make you cringe. This brake lock holds the brake pedal down so the brakes carry the load instead. It's padlock compatible, so it also doubles as a theft deterrent when you leave the machine at camp or the trailhead.

Take the Load Off the Transmission

When you park on an incline with the brake lock set, the brakes hold the machine and the transmission isn't stuck carrying all that weight. That makes shifting out of park smooth instead of a clunk, and it saves wear on the park components over time.

A Simple Theft Deterrent

Add a padlock and the brake stays locked, which makes your X3 a lot less appealing to anyone hoping for an easy ride. It's a cheap layer of security for overnight stops and crowded staging areas.

One-Foot Operation, Easy Install

You can engage and disengage the lock with one foot. Installing it is just as easy: remove the stock nuts, set the brake lock on the bolts, and thread the nuts back on. No extra hardware is needed.

Features and Specs

• Made with 1/8" steel
• Padlock compatible for theft deterrence
• Single-foot operation
• Easy installation using stock hardware

Who It's For and What Pairs Well

This is for X3 owners who park on hills, camp with their machine, or want an extra deterrent at the trailhead. Freshen up your stopping power with pads and more in Can-Am Maverick X3 brake parts, and see X3 interior accessories.

Fitment

64” Models

72” Models

Installation

Remove the stock nuts, place the brake lock on the bolts, and reinstall the nuts. See the instructions below.

• Installation instructions (MPB-CA-X3, PDF)