Low-hanging lower radius rods take hits from rocks and ruts on the Pro R, Pro S and Turbo R. DRT's Race Series XD set raises them with high-clearance lower rods and adds adjustable upper links for quick camber changes. Every rod is machined from 7075-T6 billet and uses chromoly PTFE-lined 3/4 in rod ends.
Why the Race Series XD
- More ground clearance: high-clearance lower rods sit up away from obstacles.
- Quick camber changes: adjustable upper links with right- and left-hand rod ends.
- 7075-T6 billet: CNC machined from aerospace-grade aluminum.
- Wide spherical bearings: press-fit on the chassis side of the lowers.
- Serviceable: hex bar center section and stainless spiral locking rings.
Specifications, Materials and Finish
- Material: CNC-machined 7075-T6 billet aluminum
- Rod ends: PTFE-lined 3/4 in chromoly (hub side)
- Lower chassis side: press-fit wide spherical bearing with stainless spiral locking rings
- Spacers: 303 stainless steel misalignment spacers
- Finish: mil-spec anodize, machined pockets, laser engraving
- DRT part number: 20010RR76201 (patent pending)
Fitment
| Year | Make | Model |
|---|---|---|
| 2020+ | Polaris | RZR Pro R / Pro S / Turbo R (2-door) |
| 2020+ | Polaris | RZR Pro R 4 / Pro S 4 / Turbo R 4 (4-door) |
Fitment note: DRT lists "2020-Present" for this set. The RZR Pro R and Turbo R first came out for 2022, so check your model year with us before ordering.
TRAILWORX Fitment Guarantee: fitment above is taken directly from DRT Motorsports. If you order the part listed for your vehicle and it does not fit, we will make it right with the correct part or a prepaid return, at no extra cost to you. Not sure about your trim? Send us your year, make, model and trim before you order and we will confirm it.
What's in the Box
- Complete radius rod set (high-clearance lowers and adjustable uppers)
- Chromoly PTFE-lined 3/4 in rod ends
- Wide spherical bearings, installed
- 303 stainless steel misalignment spacers
Who It's For and What Pairs Well
For owners running rocks, ruts or race courses. If you do not need the 7075 alloy or high clearance, see the DRT Polaris RZR Pro R / Turbo R 2022+ Billet Hex Bar Radius Rod Kit. Add the DRT Polaris RZR Pro R / Turbo R 3-Piece Modular Radius Rod Plate with Hitch Loop to strengthen the mount.
Installation Notes
Copy the OEM lengths before removal and swap one rod at a time. After install, confirm every jam nut is tight and set with thread locker, and paint-mark each nut so movement is easy to spot. Inspect the jam nuts before every ride. Any change to radius rod or tie rod length changes camber or toe, so get a proper alignment after install and after any adjustment, then take a short test drive and recheck the hardware. Care: rinse sand and mud off the rod ends after rides and avoid blasting them with a pressure washer at close range. Check the rod ends for play at each service and replace any that feel loose.
Free shipping on this DRT Motorsports part from Trailworx UTV. DRT Motorsports designs and builds its UTV parts in Riverside, California.
- Manufacturer:
- DRT Motorsports
- source:
- drt_site
- drt_url:
- https://drtmotorsports.com/products/billet-aluminum-7075-xd-high-clearance-radius-rod-set-drt-motorsports-pro-r-turbo-r
- desc_status:
- written_2026-10-31
- price_basis:
- DRT retail 1150.0; comp r1industriesoffroad.com 1150.0
