Run a front windshield on a Polaris RZR XP 1000 without a rear one and you'll learn about dust suction fast: the low-pressure pocket behind the front glass pulls your own dust and roost into the cab. This rear windshield closes off the back of the cab and adds a BreezeRite vent you can set closed, half open or fully open, so you control the airflow instead of the trail. It's 1/4" lightly tinted polycarbonate and fits the XP 1000 and XP 4 1000 from 2014 on.
Highlights
- Adjustable rear vent lets you control cab airflow
- Eliminates dust suction caused by running a front windshield alone
- Rear cab protection blocks mud and debris behind the seats
- Vehicle-specific fit to the contours of the cage
- 1/4" lightly tinted polycarbonate, 250x stronger than glass and 25x stronger than acrylic
- Comes complete with all hardware; made in the USA
Control Your Cab
Weather doesn't stay the same, so your windshield setup shouldn't be stuck in one position either. A rear windshield protects you from your own rooster tail and prevents the dust suction that a front windshield creates. The built-in vent gives you even more control over how much air moves through the cab.
Adapt with a BreezeRite Vent
The injection-molded BreezeRite vent has three positions. Set it fully closed when it's cold or dusty, fully open when you need extra breeze, or half open for a little air movement. Wherever you set it, it stays put, even with the pedal down on a rough trail.
Polycarbonate Strength
The 1/4" lightly tinted polycarbonate is the toughest windshield material you can get. At 250 times stronger than glass, it's built for high-speed off-road riding where you never know what might hit it from behind.
Choose Your Year
Select 2014-2023 or 2024+. The 2024+ version is priced slightly higher. On 2024+ models, the OEM Lock & Ride cargo box still works, but it won't open fully to its locked position with the rear windshield installed.
What's in the Box
- 1/4" light-tint polycarbonate rear windshield with BreezeRite vent
- All mounting hardware
- Installation instructions
Who It's For and What Pairs Well
This is for anyone running a front windshield who's tired of dust swirling into the cab, and for riders who want rear protection from mud and roost. Pair it with a full, vented or flip front windshield from RZR XP 1000 windshields (4-seat: RZR XP 4 1000 windshields), and a roof from RZR XP 1000 roof tops to seal off the cab. It works with most soft and hard tops and with the Click 6 seat belt.
Fitment
| Year | Make | Model |
|---|---|---|
| 2014+ | Polaris | RZR XP 1000 |
| 2014+ | Polaris | RZR XP 4 1000 |
| 2016-2023 | Polaris | RZR XP 1000 High Lifter Edition |
| 2017-2023 | Polaris | RZR XP 4 1000 High Lifter Edition |
| 2017-2023 | Polaris | RZR XP 1000 LE |
| 2017-2023 | Polaris | RZR XP 1000 Trails & Rocks Edition (Gold) |
- Can be used with most soft or hard tops
- Works with Click 6 Seat Belt
- For 2024+ models: OEM Lock & Ride Cargo Box is operable, but will not open fully to locked position with rear windshield installed
Installation
The rear windshield mounts to the cage with the included hardware. Instructions for 2014-2023 and 2024+ models are below.
- source:
- superatv
- satv_url:
- https://www.superatv.com/polaris-rzr-xp-1000-rear-vented-windshield
- fitment_raw:
- Polaris RZR XP 1000 2014+; Polaris RZR XP 4 1000 2014+; Polaris RZR XP 1000 High Lifter Edition 2016-2023; Polaris RZR XP 4 1000 High Lifter Edition 2017-2023; Polaris RZR XP 1000 LE 2017-2023; Polaris RZR XP 1000 Trails & Rocks Edition (Gold) 2017-2
- install_pdf:
- https://madmin.superatv.com/amfile/file/download/file/1935/product/86580/
- desc_status:
- rewritten_2026-10-22
