Riding without a spare is fine right up until you're miles out with a sidewall cut. This spare tire carrier for the Polaris RZR XP 1000 and XP 4 1000 is a single-piece mount that clamps to the factory roll cage and holds a spare up to 30" above your line of sight. It doesn't swing or need to come off to reach the bed, and it still leaves room for a cooler / cargo box underneath.
Highlights
- Holds up to a 30" tire
- Rides above the driver's line of sight
- Clamps to the factory roll cage with slip-resistant 1.75" clamps
- Full access to the bed with no swinging or removing the mount
- 45 mm x 3 mm powder-coated steel tubing
Peace of Mind on Every Ride
A spare turns a ride-ending flat into a quick roadside swap. The carrier is positioned to ride higher than the driver's line of sight, so it doesn't block your rear view, and it looks clean on the back of the RZR.
Solid, Rattle-Free Mount
This single-piece design mounts directly to the factory roll cage using slip-resistant 1.75" tube clamps, so the carrier won't rattle or shift while you ride. It's built from 45 mm x 3 mm steel tubing and powder coated for long-lasting durability.
Keeps the Bed Open
Unlike carriers that have to swing open or come off before you can load the bed, this one leaves the bed fully accessible all the time. There's still plenty of room for a cooler / cargo box below it.
Features and Specs
- 45 mm x 3 mm steel tubing
- Slip-resistant 1.75" tube clamps
- Accepts up to a 30" tire
- Powder coated for long-lasting durability
- Easy, bolt-on installation
Good to Know
- Does not fit the High Lifter edition
- A stock rear tire used as the spare will require a wheel spacer
Who It's For and What Pairs Well
This carrier is for RZR XP 1000 and XP 4 1000 owners who ride far from the truck. Add a cooler box and more storage from Polaris RZR XP 1000 cargo and storage, and find wheel spacers and wheels in RZR XP 1000 wheels.
Fitment
| Year | Make | Model |
|---|---|---|
| 2014-2023 | Polaris | RZR XP 1000 |
| 2014-2023 | Polaris | RZR XP 4 1000 |
- Does NOT fit High Lifter edition
- Stock rear tire will require a wheel spacer
Installation
The carrier bolts on with clamps around the factory cage tubes. Follow the instructions below.
- source:
- superatv
- satv_url:
- https://www.superatv.com/polaris-rzr-xp-1000-spare-tire-carrier-1
- fitment_raw:
- Polaris RZR XP 1000 2014-2023; Polaris RZR XP 4 1000 2014-2023
- install_pdf:
- https://madmin.superatv.com/amfile/file/download/file/1953/product/1458/
- desc_status:
- rewritten_2026-10-21
