Factory sway bar links let the trailing arms flex sideways into the sway bar, so the front of the car feels loose and wears out the ball joints. DRT's front M10 links are stiffer, adjustable 6061-T6 hex bar replacements for OEM 1543407 / 1543852. They fit the RZR XP 1000, XP 4 and Turbo as well as the General 1000 and General 4 1000.
Features and Benefits
- Direct OEM replacement: replaces 1543407 / 1543852 at the front.
- Hex bar body: a wrench surface for locking the links.
- Billet 6061-T6: CNC machined from aerospace-grade aluminum.
- PTFE-lined rod ends: 3-piece left/right-hand 5/8 in chromoly.
- Stainless spacers: 303 stainless rod end spacers.
- Mil-spec anodize: with laser-engraved branding.
Specifications, Materials and Finish
- Material: 6061-T6 billet aluminum
- Rod ends: 3-piece PTFE-lined 5/8 in chromoly, left and right hand thread
- Spacers: 303 stainless steel
- Finish: Military Specification anodize, laser engraved
- Position: front, M10
- Replaces: OEM 1543407 / 1543852
- DRT part number: 20010SB05201
Fitment
| Year | Make | Model |
|---|---|---|
| 2014-2024 | Polaris | RZR XP 1000 / XP 4 1000 / XP Turbo (front) |
| 2016-2024 | Polaris | General 1000 / General 4 1000 (front) |
Fitment note: Not for the General XP / Deluxe. DRT's storefront shows SKU 10010SB01201 on this product, but its description lists Product # 20010SB05201. We list it under 20010SB05201.
TRAILWORX Fitment Guarantee: fitment above is taken directly from DRT Motorsports. If you order the part listed for your vehicle and it does not fit, we will make it right with the correct part or a prepaid return, at no extra cost to you. Not sure about your trim? Send us your year, make, model and trim before you order and we will confirm it.
What's in the Box
- Pair of adjustable sway bar links
- PTFE-lined 5/8 in chromoly rod ends
- 303 stainless steel rod end spacers
Who It's For and What Pairs Well
For XP 1000 and General 1000 owners who want a tighter front end. Pair them with the rear DRT Polaris RZR XP 1000 / XP 4 / Turbo 2014-2024 Rear Sway Bar Link Kit (M10).
Installation Notes
Remove one factory front link at a time with the vehicle on its wheels, set the DRT link to the OEM length, and bolt it in. Sway bar links work in pairs, so set both sides to the same length unless you are deliberately preloading the bar, and keep the vehicle on its wheels at ride height when you set them. After install, confirm every jam nut is tight and set with thread locker, and paint-mark each nut so movement is easy to spot. Inspect the jam nuts before every ride. Care: rinse sand and mud off the rod ends after rides and avoid blasting them with a pressure washer at close range. Check the rod ends for play at each service and replace any that feel loose.
Free shipping on this DRT Motorsports part from Trailworx UTV. DRT Motorsports designs and builds its UTV parts in Riverside, California.
- Manufacturer:
- DRT Motorsports
- source:
- drt_site
- drt_url:
- https://drtmotorsports.com/products/drt-billet-aluminum-hex-bar-adjustable-sway-bar-link-kit-m10
- desc_status:
- written_2026-10-31
- price_basis:
- DRT retail 160.0; comp r1industriesoffroad.com 160.0
