If your idea of a good Saturday is a Polaris RZR XP 1000 buried to the doors in a bounty hole, this is the bumper for you. The Winch-Ready Front Bounty Bumper wraps the front end in 1.5" steel tubing, carries a winch plate that takes up to a 12,000 lb winch, and adds dimple-plate steps on each side so you can reach the caked-on mud when it's time to clean up. It fits the 2-seat XP 1000 and the 4-seat XP 4 1000.
Highlights
- Winch-ready design built for high-capacity front recovery, up to a 12,000 lb winch
- Heavy-duty 1.5" tubular steel protects the grille and front bodywork
- Left and right dimple-plate steps add grip and a distinctive Bounty look
- UV-resistant powder coating helps prevent chips, corrosion and fading
- Vehicle-specific fit for an easy, secure install
Built for the Mud
This bumper is the right mix of protection and utility for mud riders. The tube steel construction is close to indestructible and shields the RZR from front-end hits with trees, other machines, and whatever's hiding under the water. It's also a multi-function bumper with a built-in winch mount, because getting nasty until somebody gets stuck is what mud riding is all about.
Room for a Big Winch
The integrated winch plate turns the XP 1000 into a serious recovery machine. It's pre-fit for 4,500 lb, 6,000 lb, and 12,000 lb Black Ops winches. If 12,000 lb sounds like overkill, run a 4,500 or 6,000 lb winch instead, but if you're running unbelievably deep bounty holes or heading into uncharted country, the extra pull is cheap insurance. You can add a winch right on this page.
Steps That Make Cleanup Easier
Don't put the rig away dirty. Left and right foot dimple plates give you a solid place to stand while you hose out those hard-to-reach, dirt-caked spots, and they add grip when you're climbing around the front of the machine.
Tough, Aggressive Look
The 1.5" diameter steel tubing holds up to the harshest off-road conditions and gives the RZR an aggressive, intimidating face. The UV-resistant powder coat keeps it resistant to scratches and corrosion over time.
Winch Options
- No thank you (bumper only)
- 4,500 lb winch
- 6,000 lb winch
- 12,000 lb winch
Features and Specs
- Made of 1.5" diameter heavy-duty steel tubing
- Pre-fit for 4,500 lb, 6,000 lb, and 12,000 lb Black Ops winches
- Winch mounting bolt patterns: 3.0" x 6.6" (76 x 168 mm) and 4.5" x 6.5" (114 x 165.5 mm)
- Bolt patterns match most leading models; check your winch before installing
- Powder coated for UV resistance and durability
- Left and right foot dimple plates
Who It's For and What Pairs Well
This bumper is built for RZR XP 1000 and XP 4 1000 owners who ride mud, swamps and deep water, and anyone who wants a big winch up front. Protect the back end too with a bumper from Polaris RZR XP 1000 bumpers, and grab straps, snatch blocks and more from RZR XP 1000 winches and recovery. Riding in deep water? Check the snorkel kits in RZR XP 1000 performance parts.
Fitment
| Year | Make | Model |
|---|---|---|
| 2014-2023 | Polaris | RZR XP 1000 |
| 2014-2023 | Polaris | RZR XP 4 1000 |
| 2015-2023 | Polaris | RZR XP 1000 High Lifter |
| 2016-2023 | Polaris | RZR XP 4 1000 High Lifter |
| 2017-2023 | Polaris | RZR XP 1000 Trails and Rocks |
| 2015 | Polaris | RZR XP 1000 Fox Edition |
Installation
The bumper bolts to the front of the frame, and the winch bolts to the built-in plate. Instructions for the bumper and each winch size are below.
- source:
- superatv
- satv_url:
- https://www.superatv.com/polaris-rzr-xp-1000-winch-ready-front-bounty-bumper
- fitment_raw:
- Polaris RZR XP 1000 2014-2023; Polaris RZR XP 4 1000 2014-2023; Polaris RZR XP 1000 High Lifter 2015-2023; Polaris RZR XP 4 1000 High Lifter 2016-2023; Polaris RZR XP 1000 Trails and Rocks 2017-2023; Polaris RZR XP 1000 Fox Edition 2015
- install_pdf:
- https://madmin.superatv.com/amfile/file/download/file/6247/product/85167/
- desc_status:
- rewritten_2026-10-21
