Polaris changed from M10 to M12 radius rod hardware during the 64 in XP's run, which makes some aftermarket rods year specific. DRT's hex bar master kit includes both M10 and M12 hardware, so one set covers early and later 2014-2023 XP 1000, XP 4 and Turbo cars. Left- and right-hand rod ends at each end make adjustment quick.
Features and Benefits
- Covers both hardware sizes: M10 and M12 sets included.
- Fast adjustment: left- and right-hand rod ends at each end.
- Billet strength: CNC-machined 6061-T6, made in the USA.
- Hex bar center: a wrench surface for adjustment and lockup.
- Durable joints: PTFE-lined 5/8 in rod ends with 303 stainless spacers.
Specifications, Materials and Finish
- Material: CNC-machined 6061-T6 aluminum, hex bar
- Rod ends: PTFE-lined 5/8 in, left and right hand thread
- Spacers: 303 stainless steel; M12 spacer included
- Hardware: M10 and M12 sets
- Finish: Military Specification anodize, machined pockets, laser engraving
- DRT part number: 20010RR03201 (patent pending)
Fitment
| Year | Make | Model |
|---|---|---|
| 2014-2023 | Polaris | RZR XP 1000 / XP Turbo (64 in, 2-door) |
| 2014-2023 | Polaris | RZR XP 4 1000 / XP 4 Turbo (64 in, 4-door) |
Fitment note: The M12 spacer can be used chassis-side on M10 cars as an upgrade, but that conversion needs drilling and new hardware bought separately.
TRAILWORX Fitment Guarantee: fitment above is taken directly from DRT Motorsports. If you order the part listed for your vehicle and it does not fit, we will make it right with the correct part or a prepaid return, at no extra cost to you. Not sure about your trim? Send us your year, make, model and trim before you order and we will confirm it.
What's in the Box
- Complete radius rod set
- M10 hardware set
- M12 hardware set
- 303 stainless steel spacers
Who It's For and What Pairs Well
For 64 in XP owners who want one kit regardless of model year. Pair it with the DRT Polaris RZR XP 1000 / XP 4 2017+ 3-Piece Radius Rod Reinforcement Plate (M12) on M12 cars.
Installation Notes
Match the included hardware to your car's M10 or M12 pattern, copy the OEM lengths and swap one rod at a time. After install, confirm every jam nut is tight and set with thread locker, and paint-mark each nut so movement is easy to spot. Inspect the jam nuts before every ride. Any change to radius rod or tie rod length changes camber or toe, so get a proper alignment after install and after any adjustment, then take a short test drive and recheck the hardware. Care: rinse sand and mud off the rod ends after rides and avoid blasting them with a pressure washer at close range. Check the rod ends for play at each service and replace any that feel loose.
Free shipping on this DRT Motorsports part from Trailworx UTV. DRT Motorsports designs and builds its UTV parts in Riverside, California.
- Manufacturer:
- DRT Motorsports
- source:
- drt_site
- drt_url:
- https://drtmotorsports.com/products/rt-motorsports-polaris-xp1000-4-turbo-64-2014-2023-hex-bar-radius-rod-kit-master-kit-m10-m12
- desc_status:
- written_2026-10-31
- price_basis:
- DRT retail 580.0; comp r1industriesoffroad.com 580.0
