Hard Cab Enclosure Upper Doors turn a 2024+ Polaris RZR XP 4 1000 into a year-round machine. They mount right on top of the factory lower doors and close off the open space above them with sealed, hard-coated polycarbonate windows in powder-coated steel frames, keeping wind, rain, snow and trail debris out of the cab. When summer comes, they come off easily.
Highlights
- Upper doors made for the 4-seat XP 4
- 1/4" lightly tinted, abrasion-resistant polycarbonate with hard coat
- Powder-coated carbon steel frames
- Secure Seal bulb seals for a leak- and rattle-free fit
- BreezeRite vents: open, half open or closed
- Top latch reduces rattle and keeps doors shut while trailering
- Outer door handles
- Mounts directly to the OEM lower doors; removable
- Optional rear windshield
- Made in the USA
Secure Seal Technology
Bulb seals around each door press tight against the frame, so the doors sit flush and seal against water, mud and dust without rattling. The upper latch holds the door firmly closed, cutting vibration and letting you trailer the machine without the doors flying open.
BreezeRite Vents
Each door has a BreezeRite vent that can be set fully open, half open or closed. The vents hold their position on rough trails, so you can let in fresh air on a warm afternoon and close up tight when it turns cold.
Tough, Clear Polycarbonate
The windows are 1/4" lightly tinted, abrasion-resistant polycarbonate, about 250 times stronger than glass and 25 times stronger than acrylic. A hard coating adds scratch resistance, and the light tint cuts glare without yellowing over time.
Add a Rear Windshield
Doors alone block side wind and spray; adding a rear windshield stops the dust and cold air that swirl in from behind the cab. Use the rear windshield picker to add one in the same order. "No" is the base price and every rear windshield choice adds to it:
- Standard polycarbonate, Clear
- Standard polycarbonate, Light Tint
- Standard polycarbonate, Dark Tint
- Vented rear windshield, Light Tint
Building a Full Cab
For a fully enclosed RZR, combine these doors with a front windshield, a rear windshield and a roof. A closed cab also makes a cab heater far more effective.
What's in the Box
- Hard upper doors for the XP 4 with frames, seals, vents, latches and outer handles
- Rear windshield, if selected
Who It's For and What Pairs Well
For 2024+ RZR XP 4 1000 owners who ride in cold, wet or dusty weather. Finish the cab with a front windshield from 2024+ RZR XP windshields and add heat with the in-dash heater in 2024+ RZR XP interior accessories.
Fitment
| Year | Make | Model |
|---|---|---|
| 2024+ | Polaris | RZR XP 4 |
- OEM lower doors required. NOT compatible with aftermarket doors
- NOT compatible with models that have speakers in the factory lower door
Before You Order
- Requires the factory (OEM) lower doors; not compatible with aftermarket doors
- Not compatible with models that have speakers in the factory lower doors
- Fits the 4-seat XP 4 1000 only
Installation Notes
The upper doors mount directly to the OEM lower doors with the included hardware. Follow the instructions linked below and check that each door seals and latches evenly before riding.
- source:
- superatv
- satv_url:
- https://www.superatv.com/polaris-rzr-xp-4-hard-cab-enclosure-upper-doors
- fitment_raw:
- Polaris RZR XP 4 2024+
- install_pdf:
- https://madmin.superatv.com/amfile/file/download/file/11727/product/156684/
- desc_status:
- rewritten_2026-10-27