null

FREE SHIPPING ON MOST ORDERS OVER $199!

phone: 430-258-6189

Segway Villain SX10 / SX10W 2022+ Front Winch Bumper (Gen 1 & Gen 2) - DRT Motorsports

Was: $302.95
Now: $280.00
SKU:
70005FB01101
Condition:
New
Shipping:
  • Fast Shipping

  • Free Exchanges

  • Safe Payments

  • Top Notch Tech Support

Segway's Villain SX10 comes with a 4,500 lb winch from the factory, but the stock bumper does little to protect it. DRT's front winch bumper replaces the OEM bumper on both Gen 1 and Gen 2 Villains with laser-cut, formed and welded steel, keeps the factory winch fully usable and adds removable mesh and logo plates so you can color-match the car.

Why Riders Choose the DRT Front Winch Bumper (Gen 1 & Gen 2)

  • Winch retained: keeps the OEM 4,500 lb winch fully usable.
  • Steel protection: laser-cut, formed and welded steel protects from collisions, obstacles and high-speed impacts.
  • Direct replacement: replaces the stock OEM bumper on Gen 1 and Gen 2 Villains.
  • Two-tone finish: DRT Sand Black powder coat with clear anodized aluminum mesh inserts.
  • Removable inserts: mesh inserts and logo plates come off for re-coating.
  • Fairlead compatible: works with the DRT Universal 6" UTV hawse fairlead for synthetic rope (sold separately).

Specifications, Materials and Finish

  • Material: laser-cut, formed and welded steel; clear anodized aluminum mesh
  • Finish: DRT Sand Black powder coat
  • Winch: retains OEM 4,500 lb winch
  • Install: bolt-on in place of stock bumper, no fabrication
  • DRT part number: 70005FB01101 (patent pending)

Fitment

YearMakeModel
2022+SegwayVillain SX10 / SX10W (Gen 1 and Gen 2)

TRAILWORX Fitment Guarantee: fitment above is taken directly from DRT Motorsports. If you order the part listed for your vehicle and it does not fit, we will make it right with the correct part or a prepaid return, at no extra cost to you. Not sure about your trim? Send us your year, make, model and trim before you order and we will confirm it.

What's in the Box

  • Front winch bumper
  • Clear anodized aluminum mesh inserts and logo plates
  • Fairlead not included

Who It's For and What Pairs Well

For Villain SX10 and SX10W owners who want the factory winch protected. See all Bumpers - Segway Villain.

Installation Notes

Bolt-on in place of the stock bumper with no fabrication. Leave the OEM winch in place and check line travel through the fairlead opening before final tightening.

Free shipping on this DRT Motorsports part from Trailworx UTV. DRT Motorsports designs and builds its UTV armor in Riverside, California.

What Our Customers Are Saying
★★★★★

Fits flush all the way around, no gap at the top edge like the last aftermarket one I tried

Jace C.Yamaha Wolverine Full Windshield
★★★★★

Full enclosure held up through a week of rain camping, no leaks anywhere, seams are sealed well

Kyle C.Honda Talon Full Cab Enclosure
★★★★☆

Does the job well, just wish the mounting instructions had better diagrams

Grant C.Yamaha Viking Snow Plow Kit
★★★★★

Optically clear, zero waviness looking through it even at highway speeds. Seals up tight, no whistling

Corey N.Yamaha Wolverine Full Windshield
★★★★★

These doors are night and day compared to stock plastic. My kids stopped complaining about mud getting in

Zach G.CF Moto U10 Pro Convertible Full Hard Door Kit
★★★★☆

Cuts dust down a good bit, still get some coming through around the back window seam on real dusty days

Dean J.Polaris Ranger Cab Enclosure
★★★☆☆

Works but the fan is louder than I'd like on the high setting

Heath J.CF Moto Cab Heater Kit
★★★★★

Install video on youtube made this a 45 min job. Fit is tight, no wind noise at highway speed either

Travis K.CF Moto U10 Pro Convertible Full Hard Door Kit
★★★☆☆

Took longer to figure out the install than I expected, directions could be better but it works

Derek S.Polaris Ranger Cab Enclosure
★★★★★

This is the AJK bumper Trailworx pointed me to when the EMP one I wanted was backordered, glad they did, quality is great

Adam T.AJK Offroad Kawasaki Ridge Rear Bumper
★★★★★

Easy clamp-on install, no tools needed, and they fold in nice when trailering

Blake C.Can-Am Commander Side Mirrors
★★★★★

Ordered this after my stock bumper got wrecked, fit was spot on and paint matches close enough you can't tell

Kevin B.CF Moto Uforce 1000 Rear Bumper