DRT's registration sticker holder is sized for the 3.80 x 3.06 in decals used in states like Nevada and Oregon. A precision-machined 6061-T6 plate in black mil-spec anodize with contrast cuts gives the sticker a flat, rigid surface that resists flex and vibration. It mounts with one countersunk bolt to a panel or to a DRT tube clamp.
Features and Benefits
- Secure decal: machined 6061-T6 plate resists flex.
- Clean look: black anodize, contrast cuts.
- Simple install: single countersunk bolt.
- Cage options: DRT clamps 1.500-2.000 in.
- Right size: 3.80 x 3.06 in (NV, OR).
Specifications, Materials and Finish
- Material: machined 6061-T6 aluminum
- Finish: black mil-spec anodize with post-machined contrast cuts
- Sticker size: 3.80 x 3.06 in
- Mounting: single countersunk bolt, panel or DRT tube clamp
- Options: no clamp, or 1.500 / 1.750 / 1.875 / 2.000 in clamp
- DRT part number: 10005MA15201 (K1-K4 with clamp)
Fitment
| Year | Make | Model |
|---|---|---|
| Universal | Most makes | 2-door and 4-door side-by-sides |
Fitment note: Pick the clamp size that matches your cage tube outside diameter: 1.500, 1.750, 1.875 or 2.000 in. Measure the tube with calipers if you are not sure. Confirm your state's sticker size before ordering.
TRAILWORX Fitment Guarantee: fitment above is taken directly from DRT Motorsports. If you order the part listed for your vehicle and it does not fit, we will make it right with the correct part or a prepaid return, at no extra cost to you. Not sure about your trim? Send us your year, make, model and trim before you order and we will confirm it.
What's in the Box
- Registration sticker holder
- DRT tube clamp (clamp options only)
Who It's For and What Pairs Well
For Nevada and Oregon riders, or anywhere using a 3.80 x 3.06 in decal. California riders need the DRT UTV Registration Sticker Holder 4 x 2.55 in (California OHV).
Installation Notes
Apply the sticker to the clean, dry plate, then bolt the holder to a panel or clamp. Mount it where your state requires the decal to be visible. Recheck the hardware after the first ride and at each service interval. Care: wash anodized aluminum with mild soap and water and avoid acidic or alkaline cleaners, which dull the finish.
Free shipping on this DRT Motorsports part from Trailworx UTV. DRT Motorsports designs and builds its UTV parts in Riverside, California.
- Manufacturer:
- DRT Motorsports
- source:
- drt_site
- drt_url:
- https://drtmotorsports.com/products/drt-motorsports-universal-registration-sticker-holder-380x3-06-nevada-oregon
- desc_status:
- written_2026-10-31
- price_basis:
- DRT retail 25.0; comp r1industriesoffroad.com 25.0
