A fire extinguisher only helps if it stays put over rough ground and comes free in a second. DRT's quick-release mount holds the extinguisher in rubber-isolated stainless clamps on a CNC-machined 6061-T6 base, and a stainless pull pin releases it. Mount it flat to a panel, or order it with DRT tube clamps for the roll cage.
Features and Benefits
- Quick emergency access: stainless pull-pin release.
- Holds steady: rubber-isolated stainless clamps reduce vibration.
- Billet construction: CNC-machined 6061-T6 aluminum.
- Protected mechanism: enclosed worm-gear clamp stays clean.
- Mount anywhere: flat panel or DRT cage tube clamps.
Specifications, Materials and Finish
- Material: CNC-machined 6061-T6 aluminum mount and base
- Clamps: rubber-isolated stainless steel
- Release: stainless steel pull pin
- Mounting: flat bolt-on, or cage tube with DRT clamps
- Clamp options: none, 1.500, 1.750, 1.875 or 2.000 in
- DRT part number: 10005FE01201 (K1-K4 with clamps)
Fitment
| Year | Make | Model |
|---|---|---|
| Universal | Most makes | 2-seat and 4-seat side-by-sides (flat panel or round cage tube) |
Fitment note: Fire extinguisher sold separately. Universal fit; choose the clamp option that matches your cage tube diameter, or No Clamps for a flat panel. Pick the clamp size that matches your cage tube outside diameter: 1.500, 1.750, 1.875 or 2.000 in. Measure the tube with calipers if you are not sure, because a clamp one size off will not hold.
TRAILWORX Fitment Guarantee: fitment above is taken directly from DRT Motorsports. If you order the part listed for your vehicle and it does not fit, we will make it right with the correct part or a prepaid return, at no extra cost to you. Not sure about your trim? Send us your year, make, model and trim before you order and we will confirm it.
What's in the Box
- Billet extinguisher mount and base
- Rubber-isolated stainless clamps
- Stainless pull pin
- Cage tube clamps (clamp options only)
Who It's For and What Pairs Well
For any UTV owner, and required gear at many races and riding areas. Check your extinguisher's body diameter against the clamps before ordering.
Installation Notes
Mount the base where the driver or passenger can reach it without unbuckling, either bolted flat to a panel or clamped to the cage. Tighten the clamps around the extinguisher, then test the pull pin a few times so you know how it releases. Recheck the hardware after the first ride and at each service interval.
Free shipping on this DRT Motorsports part from Trailworx UTV. DRT Motorsports designs and builds its UTV parts in Riverside, California.
- Manufacturer:
- DRT Motorsports
- source:
- drt_site
- drt_url:
- https://drtmotorsports.com/products/drt-motorsports-universal-fire-extinguisher-kit
- desc_status:
- written_2026-10-31
- price_basis:
- DRT retail 105.0; comp r1industriesoffroad.com 105.0
