null

FREE SHIPPING ON MOST ORDERS OVER $199!

phone: 430-258-6189

Walker Evans Polaris RZR 900 Trail 50" Piggyback Remote Reservior Performance Coilover Shocks - 2015-2026

Was: $2,225.00
Now: $2,045.00
SKU:
A-SH-901-16-615/616 - A-SH-901-16-617/618
Condition:
New
Shipping:
  • Fast Shipping

  • Free Exchanges

  • Safe Payments

  • Top Notch Tech Support

Sold as a complete set of 4: front pair (A-SH-901-16-615/616) and rear pair (A-SH-901-16-617/618).

The 50" RZR 900 Trail is narrow enough for gated trails and wooded singletrack. That narrow track also means the stock shocks get overwhelmed quickly when the trail gets rocky or full of whoops. These Walker Evans Racing piggyback coilovers were developed specifically for the 50" Trail. They give it race-derived damping, 16 clicks of compression adjustment, and USA-made hardware you can rebuild for years.

On the trail, you'll notice the RZR stays flatter through corners and handles chop and roots more smoothly. It also feels more planted over uneven ground, which means less fatigue by the end of a long day.

Features and benefits

  • Developed for the Polaris RZR 900 Trail 50" front and rear shock positions.
  • Compression-adjustable piggyback reservoir. The reservoir gives the shock oil extra volume, which helps manage heat on long rides. The adjuster lets you firm up or soften the ride on the spot.
  • 16-way compression adjustment. Run it softer for slow, technical forest trails and firmer for faster, open terrain and bigger hits.
  • 2" billet aluminum shock body for strength and consistent damping.
  • 5/8" micro-alloy steel shaft, nitrided to resist wear and corrosion.
  • 1/2" spherical bearing shock ends for smooth movement on the mounts.
  • Made in the USA. Walker Evans Racing has decades of off-road racing behind its valving.
  • Re-valvable and rebuildable. Refresh the seals and oil, or re-tune for a new riding style, instead of buying new shocks.
  • Bolts into the factory shock brackets, with no cutting or permanent modification on OEM-mount machines.

Dialing in the 16-way compression adjuster

The adjuster is what makes this set worth more than a stock-replacement shock. For slow, rocky woods riding, turn the compression toward the soft end so the shocks can follow roots and ledges and keep the tires on the ground. For faster trails with whoops and bigger hits, add clicks so the chassis stays level and doesn't bottom out on landings. When you carry a passenger or a loaded rack, add a few clicks at the rear to keep the Trail balanced front to back. The shocks can also be re-valved, so if your riding changes a lot, from casual trail loops to faster, race-style riding, the internal valving can be updated to match.

Fitment

YearMakeModelNotes
2015-2026PolarisRZR 900 Trail 50"Front and rear, OEM arms

For use with OEM arms only, or long-travel kits where the shock mounts stay in the stock locations.

What's in the box

  • (2) front piggyback coilover shocks, Walker Evans A-SH-901-16-615/616
  • (2) rear piggyback coilover shocks, Walker Evans A-SH-901-16-617/618
  • Complete set of 4 for the front and rear of the vehicle

Who it's for, and what pairs well

This kit is for Trail owners who ride recreationally, take adventure trips, or race lightly, and want real damping control without moving to a wider machine. It also works for riders who have outgrown the stock ride but want parts they can service rather than replace. If you are building out a 900, see RZR 900 suspension parts and RZR 900 lift kits, or compare other shock packages in Shocks & Springs - Polaris RZR Trail.

Install notes

Each shock mounts in the OEM brackets with no permanent modification. Install the front and rear pairs in their marked positions, then start with the compression adjusters in the middle of the 16-click range. Make small changes from there: firmer if the RZR bottoms out or wallows, softer if it feels harsh on small chop.

What Our Customers Are Saying
★★★★★

Fits flush all the way around, no gap at the top edge like the last aftermarket one I tried

Jace C.Yamaha Wolverine Full Windshield
★★★★★

Full enclosure held up through a week of rain camping, no leaks anywhere, seams are sealed well

Kyle C.Honda Talon Full Cab Enclosure
★★★★☆

Does the job well, just wish the mounting instructions had better diagrams

Grant C.Yamaha Viking Snow Plow Kit
★★★★★

Optically clear, zero waviness looking through it even at highway speeds. Seals up tight, no whistling

Corey N.Yamaha Wolverine Full Windshield
★★★★★

These doors are night and day compared to stock plastic. My kids stopped complaining about mud getting in

Zach G.CF Moto U10 Pro Convertible Full Hard Door Kit
★★★★☆

Cuts dust down a good bit, still get some coming through around the back window seam on real dusty days

Dean J.Polaris Ranger Cab Enclosure
★★★☆☆

Works but the fan is louder than I'd like on the high setting

Heath J.CF Moto Cab Heater Kit
★★★★★

Install video on youtube made this a 45 min job. Fit is tight, no wind noise at highway speed either

Travis K.CF Moto U10 Pro Convertible Full Hard Door Kit
★★★☆☆

Took longer to figure out the install than I expected, directions could be better but it works

Derek S.Polaris Ranger Cab Enclosure
★★★★★

This is the AJK bumper Trailworx pointed me to when the EMP one I wanted was backordered, glad they did, quality is great

Adam T.AJK Offroad Kawasaki Ridge Rear Bumper
★★★★★

Easy clamp-on install, no tools needed, and they fold in nice when trailering

Blake C.Can-Am Commander Side Mirrors
★★★★★

Ordered this after my stock bumper got wrecked, fit was spot on and paint matches close enough you can't tell

Kevin B.CF Moto Uforce 1000 Rear Bumper