Add more comfort and containment to your Can-Am X3 with the latest UTV Seat from PRP! The XCR Suspension Seat new features include a removable seat cushion, a 5th point harness slot, and all new modern styling. The XCR features side bolsters towards the front that gives you some containment for when the ride gets rough. But the seat has open bolsters at the hips, which allow you to use OEM 3-point seat belts, and make it easy to use with retractable harnesses. These low sides make it much easier to get in and out of the vehicle and to get lap belts tightened. The vinyl-coated nylon suspension liner and dual-density foam decrease the impact on the body, reducing the fatigue you feel after a long day in the dirt or dunes. The removeable seat cushion give you lots of comfort on long rides, allows mud, sand, and water to drain out the bottom of the seat, and includes a 5th point slot for harnesses. Overall this seat is great for trail riding, or when you’re constantly getting in and out on rides. Constructed from durable and water resistant vinyl, so it’s easy to clean after a weekend of getting dirty and dusty.
PRP's Seat Mount and Slider Kit for the Can-Am Maverick X3 and Maverick R allow you to install your favorite PRP Seats into your UTV. Rather than just a simple adapter mount this is an entire new rail system with more height adjustments, and includes our dual locking seat sliders. A common complaint on the X3 is that the seat sliders start to get stuck after dirt and dust gets into the wheels. So we've added in our own slider kit that has been tried, tested, and proven over the last 20 years in all sorts of off-road environments. Our dual locking sliders provide more security and stability. Both the right and left sides of the sliders have locking mechanisms to keep them in place during hard impacts. These seat mounts allow for an enhanced range of adjustability, allowing the seats to get as low as they can possibly go. You have the ability to set the height and depth of the mounts to get the perfect position for each rider. Creating better comfort, and confidence behind the wheel. The flat base mounts are lower than the stock rails, and have an offset mounting point in the front. So you can flip the mounts down if you want to be lowered an inch, or flip them up if you want to raise the seat height an inch. The mounts use the existing mounting points in the cab, which allow you to raise or lower the seat in the front and back to adjust the seating angle. At the lowest settings with the mounts flipped down, you can sit about 3" lower. This mount is perfect for those with lowered cages.
For Maverick R owners this the only mount that we recommend using in the front. The passenger side of the Maverick R has a glove compartment that sticks out farther, making it harder for taller passengers to fit comfortably. This seat mount and slider kit allows you to adjust seat farther back, and adjust the recline angle to get more legroom on the passenger side. However the Rear of a Maverick R MAX you must use our standard C86 Can-Am adapter mount, as the rear sliders are a differnt design.
This kit comes with 2x XCR Seats, and the C91 Can-Am Mount and Slider Kit (Pair)
FITMENT:
Can-Am X3
Can-Am X3 MAX (Front & Rear)FITMENT:
Can-Am Maverick R
Can-Am Maverick R MAX (Front Only) - For Rear use our standard C86 Can-Am Seat Mounting Kit
This kit comes with 2x GT3. Seats, and the adapter mounts to fit into the front or rear of your Can-Am X3 & X3 MAX. The adapter mounts attach to your OEM seat base and sliders. This allows you to install the seat while retaining the ability to slide back and forth.
FITMENT:
Can-Am X3
Can-Am X3 MAX (Front & Rear)
