Say Goodbye to Cold Rides
It might be freezing outside, but we can keep you warm and toasty in your Yamaha Viking. This SuperATV Cab Heater is just what you need to take on winter rides without losing feeling in your fingers or toes. It pulls heat directly from your engine, just like a traditional car heater. With multiple temps and fan speeds to choose from, you’ll wonder how you ever made it through winter without one.
Defrost Your Windshield
Visibility and winter riding don’t always go hand in hand. This kit takes care of that. In addition to the two vents in the heater itself, we include defrost vents and hoses to keep your windshield clear of snow, ice, and fog. The vents are routed through your dash so discretely, you’d think they were stock. It’s the best way to treat yourself to clear views while cruising over frozen ground.
For a More Comfortable Cab
This electric cab heater pulls heat directly from your engine. That means the longer you ride, the more comfortable you’ll be. It’s mounted below the dash to stay hidden and out of the way. You’d probably forget it’s even there—if it weren’t for the fact that you can no longer see your breath, of course.
Fast and Easy Installation
We include everything you need for a quick and simple install. This kit comes with everything from hoses and clamps to hole saws and hose pliers. And wiring everything up is a cinch! With a new UTV heater, you’ll be kissing those cold winter rides goodbye before you know it.
Heat Faster with a Quick-Start Flow Valve
Add a quick-start flow valve to warm up your heater in half the time. At low temps, it diverts all coolant from the engine directly to your heater core. Once your engine gets hot enough, it automatically opens to send coolant to your radiator too.
Get an Idle Flow Pump for Heat in 30 Seconds
Our idle flow pump warms up your heater in 30 seconds! It actively pumps coolant through your system to warm it up faster at idle and low speeds.
Need More Cab Components?
Get the most out of your heater by completely closing in your UTV’s cab! Check out our full doors and front and rear windshields.
NOTE: Drilling through plastic and firewall required. All necessary bits are included.
It might be freezing outside, but we can keep you warm and toasty in your Yamaha Viking. This SuperATV Cab Heater is just what you need to take on winter rides without losing feeling in your fingers or toes. It pulls heat directly from your engine, just like a traditional car heater. With multiple temps and fan speeds to choose from, you’ll wonder how you ever made it through winter without one.
- Mounts under your dash
- Defrosts your windshield
- Easy to install
Defrost Your Windshield
Visibility and winter riding don’t always go hand in hand. This kit takes care of that. In addition to the two vents in the heater itself, we include defrost vents and hoses to keep your windshield clear of snow, ice, and fog. The vents are routed through your dash so discretely, you’d think they were stock. It’s the best way to treat yourself to clear views while cruising over frozen ground.
For a More Comfortable Cab
This electric cab heater pulls heat directly from your engine. That means the longer you ride, the more comfortable you’ll be. It’s mounted below the dash to stay hidden and out of the way. You’d probably forget it’s even there—if it weren’t for the fact that you can no longer see your breath, of course.
Fast and Easy Installation
We include everything you need for a quick and simple install. This kit comes with everything from hoses and clamps to hole saws and hose pliers. And wiring everything up is a cinch! With a new UTV heater, you’ll be kissing those cold winter rides goodbye before you know it.
Heat Faster with a Quick-Start Flow Valve
Add a quick-start flow valve to warm up your heater in half the time. At low temps, it diverts all coolant from the engine directly to your heater core. Once your engine gets hot enough, it automatically opens to send coolant to your radiator too.
Get an Idle Flow Pump for Heat in 30 Seconds
Our idle flow pump warms up your heater in 30 seconds! It actively pumps coolant through your system to warm it up faster at idle and low speeds.
| Quick-Start Flow Valve | Idle Flow Pump |
| Gets you heated air twice as fast | Warms up heater in under 30 seconds |
| Diverts coolant to your heater core at low temps | Actively pumps coolant at idle to increase heater temps |
| Combine our Quick-Start Flow Valve and Idle Flow Pump for maximum heat as quickly as possible when you’re slow or idle. | |
Need More Cab Components?
Get the most out of your heater by completely closing in your UTV’s cab! Check out our full doors and front and rear windshields.
NOTE: Drilling through plastic and firewall required. All necessary bits are included.
Features
- Adjustable temperature and fan speeds
- 360° adjustable vents
- High-grade radiator hoses—rated -40°F to 285°F
- Includes defrost hoses and vents
- 3.4 amps at 13.7 volts
- Capable of 14,600 BTU at 135 CFM
- Built-in shutoff valve
- Heater control box measures 10” x 4.5” 11.75”
- Comes with all necessary hardware for an easy install
- Add a quick-start flow valve and an idle flow pump to get heated air faster
Fitment
- Yamaha Viking 2014+
- Yamaha Viking EPS 2014+
- Yamaha Viking EPS Ranch Edition 2018+
- Yamaha Viking EPS SE 2015+
- Yamaha Viking VI 2015+
- Yamaha Viking VI EPS 2015+
- Yamaha Viking VI EPS Ranch Edition 2016+
- Yamaha Viking VI EPS SE 2015-2016
- source:
- superatv
- satv_url:
- https://www.superatv.com/yamaha-viking-cab-heater
- fitment_raw:
- Yamaha Viking 2014+; Yamaha Viking EPS 2014+; Yamaha Viking EPS Ranch Edition 2018+; Yamaha Viking EPS SE 2015+; Yamaha Viking VI 2015+; Yamaha Viking VI EPS 2015+; Yamaha Viking VI EPS Ranch Edition 2016+; Yamaha Viking VI EPS SE 2015-2016
- install_pdf:
- https://madmin.superatv.com/amfile/file/download/file/6028/product/95919/
- desc_status:
- satv_source_needs_rewrite
