A Can-Am Defender HD10 often works through every season, from frosty mornings feeding cattle to hot afternoons on the trail. These convertible cab enclosure doors let one set of doors handle all of it: run them as full doors to close out wind, rain and cold, or pull the upper section for half doors and open air when the weather turns warm.
Highlights
- Converts between full doors and half doors
- Lightly tinted 1/4" polycarbonate panels
- XR Optic Hard Coating for scratch and UV resistance
- Powder-coated carbon steel frame
- Secure Seal: full-length bulb seal with gas struts
- Sliding windows and bolt-on side mirrors
- Key-locking latches
- Made in the USA
Full Doors to Half Doors in a Few Minutes
A few bolts and the gas strut are all that hold the upper section on. Remove them and you have comfortable half doors at a good height for resting an arm. Want the wide-open feel? The lower section comes off too.
Sealed Against Weather and Noise
Secure Seal combines a full-length bulb seal with gas struts that press the doors firmly against the frame. That means fewer leaks, less dust and less wind noise in the cab, which you'll notice most with a heater running in winter.
Tough, Clear Panels
Polycarbonate is about 25 times stronger than acrylic and 250 times stronger than glass. The XR Optic Hard Coating resists scratches and UV, so the panels stay clear longer, and the light tint cuts glare without hurting visibility.
Handy Everyday Features
Slide the window open for fresh air or to talk to someone without opening the door, use the included mirrors to watch the bed or a trailer, and lock the latches when the machine is parked.
What's in the Box
- Pair of convertible cab enclosure doors
- Sliding windows and side mirrors
- Gas struts, latches and mounting hardware
- Instructions
Who It's For and What Pairs Well
For 2-seat Defender HD10 owners building an all-season cab. Pair with a roof from Can-Am Defender roof tops, a windshield from Defender windshields and a heater from Defender cab heaters.
Fitment
| Year | Make | Model |
|---|---|---|
| 2016+ | Can-Am | Defender HD 10 |
| 2020+ | Can-Am | Defender HD 10 6x6 |
| 2016+ | Can-Am | Defender HD 10 DPS |
| 2018+ | Can-Am | Defender HD 10 Mossy Oak |
| 2018+ | Can-Am | Defender HD 10 XMR |
| 2016+ | Can-Am | Defender HD 10 XT |
| 2016+ | Can-Am | Defender HD 10 XT Cab |
| 2018+ | Can-Am | Defender HD 10 XTP |
| 2020+ | Can-Am | Defender Limited HD 10 |
| 2020+ | Can-Am | Defender Pro HD 10 |
Note: Does not work with OEM glass windshields
Installation Notes
These doors do not work with OEM glass windshields. Plan your windshield choice before ordering. Instructions are linked below.
- source:
- superatv
- satv_url:
- https://www.superatv.com/can-am-defender-hd10-convertible-cab-enclosure-doors
- fitment_raw:
- Can-Am Defender HD 10 2016+; Can-Am Defender HD 10 6x6 2020+; Can-Am Defender HD 10 DPS 2016+; Can-Am Defender HD 10 Mossy Oak 2018+; Can-Am Defender HD 10 XMR 2018+; Can-Am Defender HD 10 XT 2016+; Can-Am Defender HD 10 XT Cab 2016+; Can-Am Defender
- install_pdf:
- https://madmin.superatv.com/amfile/file/download/file/7291/product/159373/
- desc_status:
- rewritten_2026-10-29