Can-Am Defender MAX HD11 Convertible Cab Enclosure Doors, Full-to-Half Hard Doors, 1/4" Hard-Coated Polycarbonate, Sliding Windows, Mirrors, Locking Latches

Weather changes, and so should your doors. These convertible cab enclosure doors give the Defender MAX HD11 full hard doors for cold or wet days, quick-change half doors for warm ones, and sliding windows for everything in between, all four doors at once.

Highlights

• Lightly tinted 1/4" polycarbonate
• XR Optic Hard Coating for scratch resistance
• Powder-coated carbon steel frames
• Removable top half converts full doors to half doors
• Sliding windows for airflow
• Bolt-on side-view mirrors included
• Key-locking latches
• Gas struts and full-length bulb seal
• Set for both rows

Full, Half or Open

Remove the lower-panel bolts and unhook the gas strut to turn each full door into a half door that doubles as an armrest. Want a fully open cab? Lift the doors off their hinges in minutes.

Sealed and Quiet

The full-length bulb seal and gas struts pull the doors snug to the frame, keeping moisture out and stopping rattles for a quieter cab.

Tough, Clear Panels

Polycarbonate is 25 times stronger than acrylic and 250 times stronger than glass, and the hard coat keeps it clear and scratch resistant.

Who It's For and What Pairs Well

For MAX HD11 owners who use the machine in every season. Add a roof from Defender roofs, windshields from Defender windshields and a Defender cab heater for a warm winter cab.

FAQ

Do they lock?

Yes. The latches are keyed.

Do they fit the 2-seat HD11? No. A 2-seat set is sold separately.

Are mirrors included? Yes, bolt-on side-view mirrors are included.

Built for Crews and Cold Weather

With four doors sealing both rows, the MAX HD11 cab holds heat far better, so a cab heater works much more effectively. Hunters heading out before dawn, ranchers feeding in winter and plow operators all get a warmer, drier ride. When summer arrives, convert to half doors or pull them off for full airflow.

Care Tips

• Clean the polycarbonate with mild soap, water and a soft cloth; never dry-wipe
• Avoid ammonia-based cleaners
• Lubricate hinges and latches with a dry lubricant before winter
• Check gas strut mounts and hinge bolts every few months

Fitment

Installation Notes

Install the hinges and latch strikers, hang the doors, connect the gas struts and adjust for an even seal.

• Installation instructions (DOOR-CA-DEF4, PDF)