Can-Am Maverick X3 Boxed Rear Radius Arms, Heavy-Duty Heim Joints

When you ride your Can-Am Maverick X3 hard, the rear radius arms take a lot of stress, and bent stock arms throw off your rear alignment. These boxed radius arms are built to take more. They use 1/8" heavy-duty steel with internal gussets and reinforced pivot joints, they come preadjusted to factory specs with all new bushings, and you can buy just the lower pair or a complete set of six.

Strength and Simplicity

These radius arms are made for riders who don't let off the gas to save their machine. Reinforced pivot joints, heavy-duty steel, and internal gussets give them the strength, and because they arrive preadjusted with new bushings, the install is quick and easy so you can get back out on the trail.

Boxed and Gusseted for Maximum Strength

The arms are made from 1/8" heavy-duty steel plate with internal gussets, designed like an I-beam for a lot of strength. The pivot joints are reinforced and gusseted so the usual stress points don't break, and even the frame mount is engineered to be as strong as possible. What does that mean on the trail? You can hit bigger jumps, climb rougher hills, and work through nastier rock gardens with confidence.

Easy Installation

The heavy-duty heim joints are adjusted to match stock specs before the arms ship, and all new bushings come in the box. They're ready to install right away, but you still have the adjustability to set camber if you add a lift or larger tires later. These boxed rear radius rods are backed by a lifetime warranty.

Features and Specs

• Made with 1/8" heavy-duty steel plate
• Internal gusseting for maximum strength
• Reinforced pivot joints for added strength in high-stress areas
• Heavy-duty 5/8 x 18 heim joints
• Includes all new bushings
• Heim joints preadjusted to match factory specs
• Heavy-duty frame mount design
• UV-resistant powder coating in Black or Red
• Available as the lower pair (2 rods) or a complete kit (6 rods)
• Lifetime warranty

Who They're For and What Pairs Well

If you've bent a radius rod or just want insurance before you do, this is a simple, strong upgrade for 64" and 72" X3s. Pair them with heavy-duty Maverick X3 trailing arms for a fully upgraded rear suspension, or browse all Can-Am Maverick X3 radius arms to compare billet and tubed options.

Fitment

64” Models

72" Models

Note: Compatible with both 6 and 8 bolt rear suspension configurations

Choose your color, machine width, and whether you want the lower pair or the complete 6-rod kit when you order.

Installation

Instructions are split by machine width and by lower-pair versus complete kit. Pick the one that matches your order.

• Installation instructions (RA-CA-X3-001, PDF)
• Installation instructions (RA-CA-X3-001-B2, PDF)
• Installation instructions (RA-CA-X3RS-BX, PDF)
• Installation instructions (RA-CA-X3RS-BX-B2, PDF)