Can-Am Maverick X3 Plow Pro 72" Snow Plow Kit

When a winter storm turns your driveway into a ski slope, a Can-Am Maverick X3 with a plow on the front makes it a quick job. This Plow Pro snow plow kit gives the X3 a 72" blade built from ribbed 10-gauge steel with a 4-gauge cutting edge. The quick-connect blade goes on or comes off in minutes, and the compact mount can stay on the machine all season. Add the deluxe accessory kit for side shields, plow markers, a deflector, and a dash-switch angle actuator.

Never Get Snowed In

A 72" blade makes short work of your driveway, and your neighbor's too if you're feeling generous. Because the blade uses a quick-connect system, you can put it on or take it off in minutes, so your X3 is ready the minute temperatures drop and the snow starts to stack up.

Built to Last

Ice is tough, but this plow is tougher. The blade is 10-gauge steel reinforced with support ribs for strength. The cutting edge is a 4-gauge advanced steel alloy that slices through hard-packed snow. A forward tilt and shock-absorbing springs let the blade ride smoothly over small bumps and obstacles instead of jarring the machine. All of the mounting parts are powder coated to resist rust and corrosion, so it holds up season after season.

• 10-gauge steel blade
• 4-gauge leading edge
• Flip-forward design
• Two 4-gauge vertical ribs support the high-impact areas
• 10-gauge horizontal support reinforces the leading edge

Multiple Plowing Angles

Seven plowing angles let you change your attack as you go and get into tight, hard-to-reach spots. The plow is built to operate smoothly so you get the work done quickly, and the adjustable tilt keeps the blade flat with up to 3" of lift.

• Seven adjustable plowing angles: 0°, 10°, 20°, and 30° left or right of center
• 52° to 65° adjustable attack angle
• Height-adjustable skid shoes

Simple, Bolt-On Installation

Winter weather is unpredictable, so the plow needs to be ready fast. The mounting system is compact enough to leave on the machine all winter, and it installs with minimal drilling. When the snow starts falling, attach the blade and get to work.

Deluxe Accessory Kit Upgrade

Choose the accessory kit in the options for more convenience. It includes side shields, plow markers, a deflector, and a plow angle actuator. The 3/16" steel side shields help keep your plowing line clean. The 23" plow markers make the blade edges easy to see from the seat. The 1/8" LDPE deflector keeps snow from rolling over the top of the blade. The plow angle actuator uses a dash-mounted switch and an 1,800 lb actuator, so you can change the blade angle without leaving your warm cab.

What You Need to Know Before You Order

• A winch is required to operate this snow plow.
• A Can-Am Maverick X3 frame stiffener kit or gusset kit is required.
• Machines with more than 3" of lift need the Plow Pro snow plow drop bracket (SPB-DB-001).

What's in the Box

• 72" snow plow blade
• Quick-connect snow plow mount
• Snow plow frame

Deluxe accessory kit adds:

• (2) Snow plow side shields
• Deflector and marker kit
• Plow angle actuator kit

Features and Specs

• 72" wide blade
• Winch-operated frame
• Weather-resistant powder-coated mounting parts
• Side shields use 3/16" steel plate
• Plow markers are 23" tall
• Deflector made from 1/8" LDPE
• Plow angle actuator has a 7-7/8" stroke and up to 1,800 lb of force
• Actuator turns the blade up to 30° left or right of center
• Sealed actuator with an IP67-rated solenoid and water-resistant connectors
• 3/4" chrome-plated cylinder shaft
• Easy to install; hardware and color instructions included

Who It's For and What Pairs Well

This kit is for X3 owners in snow country who want to clear driveways, lots, and trails without a truck plow. You'll need a winch to run it, so check our Maverick X3 recovery gear and winches, and the required stiffener lives in our X3 frame and chassis parts. See everything in Can-Am Maverick X3 snow plows.

Fitment

64” Models

72” Models

• Requires Can-Am Maverick X3 Frame Stiffener Kit / Gusset Kit
• Machines with more than 3” of lift require our Plow Pro Snow Plow drop bracket: SPB-DB-001

Choose whether to add the deluxe accessory kit when you order.

Installation

• Installation instructions (SPK-CA-X3, PDF)