The Pioneer 700 is a dependable chore machine, and winter chores are a lot easier in a heated cab. The Firestorm HT_CU_419 is made for the 2017-2026 Pioneer 700 and uses engine coolant to make up to 18,000 BTU. Two defrost vents keep the windshield clear, and the driver and passenger each get a vent.
Pioneer 700 Highlights
- Fits 2017-2026 Honda Pioneer 700 per Moto Alliance.
- Temperature and fan speed are adjustable, and the heater makes up to 18,000 BTU for chore runs.
- Defrost on two vents, plus cab vents that turn 360 degrees.
- Brackets and hose lengths made for the Pioneer 700.
Pioneer 700 Tips
- The 700 has a smaller engine than the 1000, so let it warm up before you turn the fan up.
- Start with defrost on, then move the air to the cab vents once the glass clears.
- Turn off coolant flow to the heater when summer chores start.
Firestorm Heater Specifications
- Heat output: up to 18,000 BTU from the engine coolant, with airflow from 0 to 125 CFM
- Adjustable temperature and fan speed, with 360-degree adjustable vents
- Dedicated driver and passenger vents, plus two defrost vents aimed at the windshield
- Built-in shutoff valve to close off coolant flow in warm weather
- Automotive-grade radiator hose rated from -40 to 120 degrees C
- High-performance alloy radiator Y connectors
- No visible heater core, for a factory-installed look
Fitment
| Year | Make | Model |
|---|---|---|
| 2017-2026 | Honda | Pioneer 700 |
Note: Moto Alliance lists this for the Pioneer 700. It does not say whether it fits the 700-4. Ask us if you have a 4-seat.
What's in the Box
- Firestorm heater unit with fan, temperature and fan-speed controls
- Driver, passenger and two defrost vents
- Brackets and hose lengths made for the Honda Pioneer 700
- Automotive-grade radiator hose and alloy radiator Y connectors
- Built-in coolant shutoff valve
- All installation hardware and instructions
Who It's For and What Pairs Well
This heater is for Pioneer 700 owners working on farms, acreage and job sites through the winter. Close in the cab with a Pioneer windshield, roof and doors or cab enclosure, and add a Pioneer snow plow.
Installation Notes
Install with the included Pioneer brackets and plumb into the coolant system using the supplied hose and alloy Y connectors. Refill and bleed the coolant per the Moto Alliance PDF, and check for leaks after the first warm-up.
- source:
- motoalliance
- ma_url:
- https://www.motoalliance.com/firestorm-cab-heater-pioneer_700
- desc_status:
- written_2026-10-28
- ma_parts:
- HT_CU_419 $399.99
