The Teryx is a solid all-around machine for hunting land and trail rides, and it gets a lot more useful in the cold with real heat. The Firestorm HT_CU_433 is made for the 2019-2026 Teryx and uses engine coolant to make up to 18,000 BTU. Two defrost vents work on the windshield, and the driver and passenger each get an adjustable vent.
Teryx Highlights
- Fits 2019-2026 Kawasaki Teryx per Moto Alliance.
- Set the temperature and fan to suit the ride, up to 18,000 BTU.
- A pair of defrost outlets for the glass, plus swiveling vents for both seats.
- Brackets and hose lengths made for the Teryx.
Teryx Winter Tips
- Add doors and a windshield if you want the most heat out of the Teryx.
- Check the coolant level after the first ride.
- Close the valve when spring turkey season ends and the weather turns warm.
Firestorm Heater Specifications
- Heat output: up to 18,000 BTU from the engine coolant, with airflow from 0 to 125 CFM
- Adjustable temperature and fan speed, with 360-degree adjustable vents
- Dedicated driver and passenger vents, plus two defrost vents aimed at the windshield
- Built-in shutoff valve to close off coolant flow in warm weather
- Automotive-grade radiator hose rated from -40 to 120 degrees C
- High-performance alloy radiator Y connectors
- No visible heater core, for a factory-installed look
Fitment
| Year | Make | Model |
|---|---|---|
| 2019-2026 | Kawasaki | Teryx |
Note: Moto Alliance lists this for the Kawasaki Teryx. Teryx4 and Teryx S fitment is not stated separately.
What's in the Box
- Firestorm heater unit with fan, temperature and fan-speed controls
- Driver, passenger and two defrost vents
- Brackets and hose lengths made for the Kawasaki Teryx
- Automotive-grade radiator hose and alloy radiator Y connectors
- Built-in coolant shutoff valve
- All installation hardware and instructions
Who It's For and What Pairs Well
This heater is for Teryx owners heading to the stand before daylight or riding cold trails. Pair it with a Teryx windshield, roof and doors, and add a Teryx snow plow.
Installation Notes
The heater mounts with Teryx-specific brackets and plumbs into the coolant system with the supplied hose and alloy Y connectors. Follow the PDF, refill and bleed the coolant, and check for leaks once the engine is up to temperature.
- source:
- motoalliance
- ma_url:
- https://www.motoalliance.com/firestorm-cab-heater-teryx
- desc_status:
- written_2026-10-28
- ma_parts:
- HT_CU_433 $399.99
