The UForce 1000 is a lot of work machine for the money, and heat makes it a true four-season machine. The Firestorm HT_CU_474 fits the 2019-2026 UForce 1000 and uses engine coolant to make up to 18,000 BTU. Two defrost vents keep the windshield clear, and the driver and passenger each get an adjustable vent.
UForce 1000 Highlights
- Fits 2019-2026 CFMoto UForce 1000 per Moto Alliance.
- Fan speed and temperature are adjustable, with up to 18,000 BTU of output.
- Two vents clear the windshield while two warm the cab.
- UForce-specific brackets and pre-sized hose lengths.
UForce Tips
- Give the UForce a few minutes of run time before you turn the fan all the way up.
- Defrost first on frosty mornings.
- Close the heater valve for summer field work.
Firestorm Heater Specifications
- Heat output: up to 18,000 BTU from the engine coolant, with airflow from 0 to 125 CFM
- Adjustable temperature and fan speed, with 360-degree adjustable vents
- Dedicated driver and passenger vents, plus two defrost vents aimed at the windshield
- Built-in shutoff valve to close off coolant flow in warm weather
- Automotive-grade radiator hose rated from -40 to 120 degrees C
- High-performance alloy radiator Y connectors
- No visible heater core, for a factory-installed look
Fitment
| Year | Make | Model |
|---|---|---|
| 2019-2026 | CFMoto | UForce 1000 |
Note: Moto Alliance lists this for the UForce 1000. UForce 1000 XL fitment is not stated.
What's in the Box
- Firestorm heater unit with fan, temperature and fan-speed controls
- Driver, passenger and two defrost vents
- Brackets and hose lengths made for the CFMoto UForce 1000
- Automotive-grade radiator hose and alloy radiator Y connectors
- Built-in coolant shutoff valve
- All installation hardware and instructions
Who It's For and What Pairs Well
This heater is for UForce 1000 owners doing winter chores and hunting. Close in the cab with a UForce windshield and doors or cab enclosure, and add a UForce snow plow.
Installation Notes
Install with the included UForce brackets and plumb into the coolant system using the supplied hose and alloy Y connectors. Follow the Moto Alliance PDF, refill and bleed the coolant, and check clamps after a few heat cycles.
- source:
- motoalliance
- ma_url:
- https://www.motoalliance.com/FIRESTORM-Cab-Heater-CFMoto-UForce-1000
- desc_status:
- written_2026-10-28
- ma_parts:
- HT_CU_474 $399.99
