Adding rear lights, chase lights or a backlight circuit on a Polaris with the PULSE Bus Bar should not mean splicing into factory wiring. DRT's two-light switch system, built with XTC Power Products, plugs into the PULSE Bus Bar and powers two lights from one rocker switch. A fully loomed 15 ft harness runs front to rear, and a sealed 10 A fuse holder protects the circuit.
Features and Benefits
- Plug-in: direct PULSE Bus Bar fit.
- Protected wiring: fully loomed 15 ft harness.
- One switch: controls main and backlight circuits.
- Dual outputs: red, black and yellow leads.
- Sealed fuse: 10 A holder.
Specifications, Materials and Finish
- Includes: 3 ft switch harness; fully loomed 15 ft rear harness; sealed fuse holder; custom blue/red rocker switch
- Rating: 10 A or less
- Outputs: standard light plus separate backlight (red, black, yellow leads)
- Built with: XTC Power Products
- DRT part number: 20005WH01501
Fitment
| Year | Make | Model |
|---|---|---|
| 2019+ | Polaris | Models equipped with the PULSE Bus Bar |
Fitment note: Only for Polaris models with the PULSE Bus Bar. Rated 10 A or less, so check your lights' current draw. Lights not included.
TRAILWORX Fitment Guarantee: fitment above is taken directly from DRT Motorsports. If you order the part listed for your vehicle and it does not fit, we will make it right with the correct part or a prepaid return, at no extra cost to you. Not sure about your trim? Send us your year, make, model and trim before you order and we will confirm it.
What's in the Box
- 3 ft switch harness
- 15 ft loomed rear harness
- Sealed fuse holder
- Blue/red rocker switch
Who It's For and What Pairs Well
For Polaris owners adding chase or rear lights, such as on DRT light mounts.
Installation Notes
Disconnect the battery, mount the rocker switch in a dash blank, plug into the PULSE Bus Bar, and route the 15 ft harness along factory paths to the rear, away from the exhaust and moving suspension. Zip-tie it every 12 in or so, connect the lights, and test before closing panels.
Free shipping on this DRT Motorsports part from Trailworx UTV. DRT Motorsports designs and builds its UTV parts in Riverside, California.
- Manufacturer:
- DRT Motorsports
- source:
- drt_site
- drt_url:
- https://drtmotorsports.com/products/drt-motorsports-light-duty-single-switch-system-for-polaris-pulse-bar-system
- desc_status:
- written_2026-10-31
- price_basis:
- DRT retail 85.0; comp r1industriesoffroad.com 85.0
