DRT's rear links for the Pro R are a direct replacement for OEM 1544079. They are adjustable 6061-T6 barrel links, made in the USA, with machined wrench notches and PTFE-lined chromoly rod ends. Their stiffness cuts the flex the trailing arms put into the rear sway bar.
Features and Benefits
- Direct replacement: OEM P/N 1544079.
- Barrel design: left/right adjustable with wrench notches.
- Made in the USA: complete replacement set.
- Billet 6061-T6: CNC machined from aerospace-grade aluminum.
- PTFE-lined rod ends: 3-piece left/right-hand 5/8 in chromoly.
- Stainless spacers: 303 stainless rod end spacers.
Specifications, Materials and Finish
- Material: 6061-T6 billet aluminum
- Rod ends: 3-piece PTFE-lined 5/8 in chromoly, left and right hand thread
- Spacers: 303 stainless steel
- Finish: Military Specification anodize, laser engraved
- Design: adjustable barrel with wrench notches
- Position: rear
- Replaces: OEM 1544079
- DRT part number: 20010SB12201
Fitment
| Year | Make | Model |
|---|---|---|
| 2022+ | Polaris | RZR Pro R / Pro R 4 (rear) |
TRAILWORX Fitment Guarantee: fitment above is taken directly from DRT Motorsports. If you order the part listed for your vehicle and it does not fit, we will make it right with the correct part or a prepaid return, at no extra cost to you. Not sure about your trim? Send us your year, make, model and trim before you order and we will confirm it.
What's in the Box
- Pair of adjustable sway bar links
- PTFE-lined 5/8 in chromoly rod ends
- 303 stainless steel rod end spacers
Who It's For and What Pairs Well
For Pro R owners. Pair them with the front DRT Polaris RZR Pro R / Turbo R 2022+ Sway Bar Link Kit.
Installation Notes
Remove one factory rear link at a time with the vehicle on its wheels, set the DRT link to the OEM length, and bolt it in. Sway bar links work in pairs, so set both sides to the same length unless you are deliberately preloading the bar, and keep the vehicle on its wheels at ride height when you set them. After install, confirm every jam nut is tight and set with thread locker, and paint-mark each nut so movement is easy to spot. Inspect the jam nuts before every ride. Care: rinse sand and mud off the rod ends after rides and avoid blasting them with a pressure washer at close range. Check the rod ends for play at each service and replace any that feel loose.
Free shipping on this DRT Motorsports part from Trailworx UTV. DRT Motorsports designs and builds its UTV parts in Riverside, California.
- Manufacturer:
- DRT Motorsports
- source:
- drt_site
- drt_url:
- https://drtmotorsports.com/products/drt-rzr-pro-r-2022-rear-sway-bar-link-kit
- desc_status:
- written_2026-10-31
- price_basis:
- DRT retail 245.0; comp r1industriesoffroad.com 245.0
