One DRT barrel link kit covers both the front of the Pro R and Turbo R and the rear of the Turbo R. It replaces OEM 1544329 at the front and OEM 1544543 at the Turbo R rear, with the misalignments clocked the same way. The links are adjustable 6061-T6 with machined wrench notches and PTFE-lined chromoly rod ends.
Features and Benefits
- Direct OEM replacement: 1544329 front and 1544543 Turbo R rear.
- Barrel design: left/right adjustable with wrench notches.
- Made in the USA: complete replacement set.
- Billet 6061-T6: CNC machined from aerospace-grade aluminum.
- PTFE-lined rod ends: 3-piece left/right-hand 5/8 in chromoly.
- Stainless spacers: 303 stainless rod end spacers.
Specifications, Materials and Finish
- Material: 6061-T6 billet aluminum
- Rod ends: 3-piece PTFE-lined 5/8 in chromoly, left and right hand thread
- Spacers: 303 stainless steel
- Finish: Military Specification anodize, laser engraved
- Design: adjustable barrel with wrench notches
- Replaces: OEM 1544329 (front), 1544543 (Turbo R rear)
- DRT part number: 20010SB11201
Fitment
| Year | Make | Model |
|---|---|---|
| 2022+ | Polaris | RZR Pro R / Pro R 4 (front) |
| 2022+ | Polaris | RZR Turbo R / Turbo R 4 (front and rear) |
Fitment note: DRT's listing contradicts itself on position. The application line says "Pro R rear, Turbo R front/rear", but the description and OEM numbers say Pro R front, Turbo R front and rear. A note also cites OEM 1544079, which is the Pro R rear link. For the Pro R rear, DRT sells the DRT Polaris RZR Pro R 2022+ Rear Sway Bar Link Kit. Check your OEM link number before ordering.
TRAILWORX Fitment Guarantee: fitment above is taken directly from DRT Motorsports. If you order the part listed for your vehicle and it does not fit, we will make it right with the correct part or a prepaid return, at no extra cost to you. Not sure about your trim? Send us your year, make, model and trim before you order and we will confirm it.
What's in the Box
- Pair of adjustable sway bar links
- PTFE-lined 5/8 in chromoly rod ends
- 303 stainless steel rod end spacers
Who It's For and What Pairs Well
For Pro R and Turbo R owners. On a Pro R, pair it with the rear DRT Polaris RZR Pro R 2022+ Rear Sway Bar Link Kit.
Installation Notes
Remove one factory sway bar link at a time with the vehicle on its wheels, set the DRT link to the OEM length, and bolt it in. Sway bar links work in pairs, so set both sides to the same length unless you are deliberately preloading the bar, and keep the vehicle on its wheels at ride height when you set them. After install, confirm every jam nut is tight and set with thread locker, and paint-mark each nut so movement is easy to spot. Inspect the jam nuts before every ride. Care: rinse sand and mud off the rod ends after rides and avoid blasting them with a pressure washer at close range. Check the rod ends for play at each service and replace any that feel loose. DRT's install video shows a Pro XP, but the steps are very similar for the Pro R and Turbo R.
Free shipping on this DRT Motorsports part from Trailworx UTV. DRT Motorsports designs and builds its UTV parts in Riverside, California.
- Manufacturer:
- DRT Motorsports
- source:
- drt_site
- drt_url:
- https://drtmotorsports.com/products/drt-rzr-pro-r-turbo-r-2022-sway-bar-link-kit
- desc_status:
- written_2026-10-31
- price_basis:
- DRT retail 180.0; comp r1industriesoffroad.com 180.0
