The most common complaint from Pro XP owners is that there is nowhere to rest an arm, for the driver or the passenger. DRT's front door arm rests fix that. Each has a double-stitched carbon fiber vinyl pad over high-density foam and a hold-down grip, positioned so you can brace yourself in the car at speed or in rough terrain. They work with most door bags, including DRT and PRP Pro Series bags. Covered by US Patent D982502.
Features and Benefits
- Comfort: padded rest where the door has none.
- Extra grip point: built-in hold-down grip.
- Quality materials: double-stitched carbon fiber vinyl, high-density foam.
- Replaceable grip: accepts your favorite motocross grips.
- Door bag compatible: works with DRT and PRP Pro Series bags.
Specifications, Materials and Finish
- Construction: mounting bracket; double-stitched carbon fiber vinyl over high-density foam; replaceable rubber grip
- Grip: accepts standard motocross grips
- Sold as: front pair
- Install: some drilling required
- Patent: US D982502
- DRT part number: RZRPROAR1
Fitment
| Year | Make | Model |
|---|---|---|
| 2020-2024 | Polaris | RZR Pro XP, 2 and 4-door (front doors) |
| 2020-2024 | Polaris | RZR Pro R, 2 and 4-door (front doors) |
| 2020-2024 | Polaris | RZR Turbo R, 2 and 4-door (front doors) |
Fitment note: DRT lists 2020-2024 for all three. The Pro R and Turbo R began in 2022. DRT sells a matching rear pair for 4-door models separately.
TRAILWORX Fitment Guarantee: fitment above is taken directly from DRT Motorsports. If you order the part listed for your vehicle and it does not fit, we will make it right with the correct part or a prepaid return, at no extra cost to you. Not sure about your trim? Send us your year, make, model and trim before you order and we will confirm it.
What's in the Box
- Front door arm rests (pair) with grips
Who It's For and What Pairs Well
For Pro Series drivers and passengers on long or rough rides.
Installation Notes
Mark the arm rest position on each front door, drill as directed, and bolt the brackets on. Swap in your own motocross grips if you like, using grip glue or safety wire. Before drilling, check behind the panel or tube for wiring, lines and hoses. Deburr each hole and seal bare metal with paint so it cannot rust. Recheck all hardware after the first ride and at each service interval.
Free shipping on this DRT Motorsports part from Trailworx UTV. DRT Motorsports designs and builds its UTV parts in Riverside, California.
- Manufacturer:
- DRT Motorsports
- source:
- drt_site
- drt_url:
- https://drtmotorsports.com/products/drt-rzr-pro-xp-2020-door-arm-rests-front-pair
- desc_status:
- written_2026-10-31
- price_basis:
- DRT retail 277.0; comp r1industriesoffroad.com 277.0
