DRT's Pro Series wind diffuser is for riders who want protection from wind and dust without the hassle of a full windshield. It mounts to the lower A-pillar of 2020-2024 RZR Pro XP, Pro R and Turbo R models and directs enough airflow to get the wind out of your face at speed and divert dust from riders. The aluminum body has removable raw mesh inserts you can color match.
Features and Benefits
- Wind and dust control: lower A-pillar mount.
- No full windshield: directional airflow, open cab.
- Color-match ready: raw mesh panels remove easily.
- Aluminum: body with removable mesh inserts.
- Broad fit: Pro XP, Pro R, Turbo R, all models.
Specifications, Materials and Finish
- Body: aluminum
- Mesh panels: raw aluminum, removable
- Mounting: lower A-pillar; bolt-on, requires drilling the cage
- DRT part number: 20005WD01101
Fitment
| Year | Make | Model |
|---|---|---|
| 2020-2024 | Polaris | RZR Pro XP, 2 and 4-door |
| 2020-2024 | Polaris | RZR Pro R, 2 and 4-door |
| 2020-2024 | Polaris | RZR Turbo R, 2 and 4-door |
Fitment note: DRT lists 2020-2024 for all three. The Pro R and Turbo R began in 2022. Installation requires drilling the cage.
TRAILWORX Fitment Guarantee: fitment above is taken directly from DRT Motorsports. If you order the part listed for your vehicle and it does not fit, we will make it right with the correct part or a prepaid return, at no extra cost to you. Not sure about your trim? Send us your year, make, model and trim before you order and we will confirm it.
What's in the Box
- Wind diffuser with mesh panels
- Mounting hardware
Who It's For and What Pairs Well
For Pro Series riders who want an open cab with less wind.
Installation Notes
Mount the diffuser to the lower A-pillar, drilling the cage as required. Plan the exact position with the diffuser held in place and the seats occupied before you drill, so it sits where it actually deflects air off the driver and passenger. Mark, center-punch and drill the cage carefully, deburr, and coat the bare metal to prevent rust. Remove the mesh panels before painting or powder coating them, and refit them with the original hardware. Recheck all hardware after the first ride and at each service interval.
Free shipping on this DRT Motorsports part from Trailworx UTV. DRT Motorsports designs and builds its UTV parts in Riverside, California.
- Manufacturer:
- DRT Motorsports
- source:
- drt_site
- drt_url:
- https://drtmotorsports.com/products/drt-pro-xp-wind-diffuser
- desc_status:
- written_2026-10-31
- price_basis:
- DRT retail 220.0; comp r1industriesoffroad.com 220.0
