null

FREE SHIPPING ON MOST ORDERS OVER $199!

phone: 430-258-6189

Polaris RZR Pro XP / Turbo R 2020+ Rear Bumper - DRT Motorsports

Was: $642.95
Now: $595.00
SKU:
20005RB03101
Condition:
New
Shipping:
  • Fast Shipping

  • Free Exchanges

  • Safe Payments

  • Top Notch Tech Support

DRT's rear bumper for the RZR Pro XP and Turbo R puts steel across the back of the car without fighting the factory body lines. Removable mesh inserts can be painted, and the removable center cover lets you either fully hide a factory exhaust or put your aftermarket system on display.

Why Riders Choose the DRT Rear Bumper

  • Real rear protection: steel construction protects against hard hits.
  • Follows the factory lines: integrates with the Pro XP / Turbo R bodywork.
  • Paintable mesh: removable aluminum mesh inserts.
  • Removable exhaust cover: show off an aftermarket exhaust or cover the factory one.
  • All models: fits 2020+ Pro XP and Turbo R, 2- and 4-door.

Specifications, Materials and Finish

  • Material: steel; removable aluminum mesh; removable center exhaust cover
  • Install: bolt-on; trimming may be required with some aftermarket exhausts
  • DRT part number: 20005RB03101 (patent pending)

Fitment

YearMakeModel
2020+PolarisRZR Pro XP / Pro XP 4
2020+PolarisRZR Turbo R / Turbo R 4

TRAILWORX Fitment Guarantee: fitment above is taken directly from DRT Motorsports. If you order the part listed for your vehicle and it does not fit, we will make it right with the correct part or a prepaid return, at no extra cost to you. Not sure about your trim? Send us your year, make, model and trim before you order and we will confirm it.

What's in the Box

  • Rear bumper
  • Removable aluminum mesh inserts
  • Removable center exhaust cover

Who It's For and What Pairs Well

For Pro XP and Turbo R owners. Pair with the DRT Polaris RZR Pro XP 2020-2026 V2.0 HD Front Winch Bumper. See Bumpers - RZR Pro XP and Bumpers - RZR Turbo R.

Installation Notes

Easy bolt-on. DRT notes that some aftermarket exhaust systems may require trimming, so test-fit with your exhaust in place before final tightening. Decide early whether you will run the center exhaust cover, and pull the mesh inserts before install if you plan to paint them. Recheck all hardware after the first ride.

Free shipping on this DRT Motorsports part from Trailworx UTV. DRT Motorsports designs and builds its UTV armor in Riverside, California.

What Our Customers Are Saying
★★★★★

Fits flush all the way around, no gap at the top edge like the last aftermarket one I tried

Jace C.Yamaha Wolverine Full Windshield
★★★★★

Full enclosure held up through a week of rain camping, no leaks anywhere, seams are sealed well

Kyle C.Honda Talon Full Cab Enclosure
★★★★☆

Does the job well, just wish the mounting instructions had better diagrams

Grant C.Yamaha Viking Snow Plow Kit
★★★★★

Optically clear, zero waviness looking through it even at highway speeds. Seals up tight, no whistling

Corey N.Yamaha Wolverine Full Windshield
★★★★★

These doors are night and day compared to stock plastic. My kids stopped complaining about mud getting in

Zach G.CF Moto U10 Pro Convertible Full Hard Door Kit
★★★★☆

Cuts dust down a good bit, still get some coming through around the back window seam on real dusty days

Dean J.Polaris Ranger Cab Enclosure
★★★☆☆

Works but the fan is louder than I'd like on the high setting

Heath J.CF Moto Cab Heater Kit
★★★★★

Install video on youtube made this a 45 min job. Fit is tight, no wind noise at highway speed either

Travis K.CF Moto U10 Pro Convertible Full Hard Door Kit
★★★☆☆

Took longer to figure out the install than I expected, directions could be better but it works

Derek S.Polaris Ranger Cab Enclosure
★★★★★

This is the AJK bumper Trailworx pointed me to when the EMP one I wanted was backordered, glad they did, quality is great

Adam T.AJK Offroad Kawasaki Ridge Rear Bumper
★★★★★

Easy clamp-on install, no tools needed, and they fold in nice when trailering

Blake C.Can-Am Commander Side Mirrors
★★★★★

Ordered this after my stock bumper got wrecked, fit was spot on and paint matches close enough you can't tell

Kevin B.CF Moto Uforce 1000 Rear Bumper