Mud pits, river crossings and swamp trails are a blast in a 2024+ Polaris RZR XP 1000, right up until water gets pulled into the engine or clutch. This Depth Finder Snorkel Kit raises the engine intake, the CVT intake and the CVT exhaust up high behind the cab, and extends the vent lines, so you can push through deeper water without flooding the engine, the belt or the crankcase.
Highlights
- Four heavy-duty risers raise the engine and clutch air intakes and the clutch exhaust
- Closed-cell silicone sponge gaskets for watertight seals
- Riser mounting plate keeps the risers aligned and evenly spaced
- Extra-long vent hoses for fuel, front differential and transmission
- Bellows and check valves keep water out of the vent lines
- All brackets, plugs, hardware and full-color instructions included
Why Snorkel a RZR
The factory intakes sit low in the machine. Once water gets close to them, the engine can ingest it (hydrolocking and bending internal parts) and the clutch housing can fill, soaking the belt and leaving you stranded. Raising every intake point protects the engine and drivetrain, and it's far cheaper than a rebuilt engine or a tow out of the swamp.
Seals That Stay Sealed
A snorkel is only as good as its weakest joint. The closed-cell silicone sponge gaskets don't soak up water, and they keep sealing after repeated dunkings, hot and cold cycles and pressure washing. The airbox gets its own silicone seal so water can't sneak in at the lid.
Vent Lines Done Right
Water can also get into the differential, transmission and fuel tank through their vent lines. The kit replaces these with extra-long hoses that route up high, with bellows on the diff and transmission and check valves on the fuel vent, so water stays out even when the machine sits submerged for a moment.
What's in the Box
- (4) Snorkel risers with faceplates
- Riser mounting brackets
- Airbox intake and hose
- Belt exhaust boot and hose
- Closed-cell silicone sponge airbox seal
- Fuel vent hose and check valves
- Front differential vent hose and bellow
- Transmission vent hose and bellow
- All required brackets, plugs and hardware
- Full-color instructions
Who It's For and What Pairs Well
For 2024+ RZR XP and XP 4 owners who ride mud, rivers, creeks or flooded trails. Add an EPDM airbox seal from RZR XP 1000 2024+ engine and performance for an extra layer of protection, and a Stage 2 clutch kit from RZR XP 1000 2024+ clutch and transmission if you're also running big mud tires.
Fitment
| Year | Make | Model |
|---|---|---|
| 2024+ | Polaris | RZR XP 1000 |
| 2024+ | Polaris | RZR XP 4 1000 |
Note: Does not fit High Lifter Models.
Installation Notes
Plan on a few hours: you'll mount the riser plate and risers, route the intake and exhaust hoses, install the airbox seal and replace the vent lines. Take your time sealing every connection. This kit does not fit High Lifter edition models.
- source:
- superatv
- satv_url:
- https://www.superatv.com/polaris-rzr-xp-depth-finder-snorkel-kit
- fitment_raw:
- Polaris RZR XP 1000 2024+; Polaris RZR XP 4 1000 2024+
- install_pdf:
- https://madmin.superatv.com/amfile/file/download/file/11508/product/155646/
- desc_status:
- rewritten_2026-10-27
