Polaris RZR XP Turbo S & XP 4 Turbo S Rear Windshield, 1/4" Polycarbonate, Clear or Dark Tint, Stops Cab Dust Suction, Preassembled

Put a front windshield on a Polaris RZR XP Turbo S and you'll notice something odd: dust starts swirling into the cab from behind. The front panel creates low pressure in the cab and pulls dirt in from the back. This Rear Windshield fixes that, and it also blocks mud and rocks thrown by the rear tires and keeps rain out from behind.

Highlights

• Stops dust being pulled in from the rear when you run a front windshield
• Blocks mud and debris from the rear tires
• 1/4" polycarbonate: 250x stronger than glass, 25x stronger than acrylic
• Clear or dark tint
• Rubber bulb seals and foam gaskets included
• Heavy-duty clamps
• Arrives preassembled; made in the USA

A Sealed, Quiet Fit

Rubber bulb seals and foam gaskets close the gaps between the panel and the cage, so wind and moisture stay out and the cab stays quieter. Heavy-duty clamps hold everything in place on rough trails.

Practically Unbreakable

Polycarbonate doesn't shatter like glass, so branches, rocks and even a rollover won't break it. It's the right material for a panel sitting right behind your head.

Clear or Tinted

Clear keeps the best rearward view, especially at dusk. Dark tint cuts glare and adds privacy and a sharp look. Choose your material at checkout.

Fitment Notes

• Can be used with most soft or hard tops

Why Dust Pours In With Only a Front Windshield

When air moves over a closed-front cab, it creates a pocket of low pressure inside. Dust from the rear tires gets drawn straight into that pocket and ends up on you, the seats and the dash. Closing off the back with a rear windshield balances the pressure, and the cab stays noticeably cleaner on dry trails.

Care Tips

Rinse with plenty of water before wiping, then use a soft microfiber cloth and a plastic-safe cleaner. Skip paper towels and ammonia cleaners, which can haze polycarbonate.

What's in the Box

• Preassembled rear windshield
• Bulb seals, foam gaskets, clamps and hardware

Who It's For and What Pairs Well

Every Turbo S running a front windshield should have one. Build out the cab with a front windshield from RZR Turbo S windshields, a top from RZR Turbo S roofs and a heater from RZR Turbo S interior accessories.

Fitment

Note: Can be used with most soft or hard tops

Installation Notes

Fit the seals and gaskets, set the panel against the rear of the cage and tighten the clamps evenly. It's a short job with basic tools.

• Installation instructions (RWS-P-RZRXPTS, PDF)