Polaris RZR XP Turbo / Turbo EPS / XP 4 Turbo Viper V3 4,500 lb Winch Kit with Mount Plate

The 2016-2021 RZR Turbo gets ridden hard and far, and a winch is the one piece of recovery gear you will be glad you brought. This kit pairs the Viper MA11906T Turbo-specific mount with a Viper V3 4,500 lb standard spool winch. Mount, winch, rope, fairlead, remote and switches come in one order.

Made for the RZR Turbo

• MA11906T plate built for the 2016-2021 RZR Turbo and Turbo 4 front end, including Dynamix models.
• Black powder-coated steel with all mounting hardware included.
• V3 is a compact, IP67-sealed winch with recessed terminals for tight spaces.
• Pick black, blue or red rope.
• Automatic brake holds 100% of the load when you stop winching.

Winching Tips for Turbo Owners

• Keep at least five wraps of rope on the drum during a pull.
• Use a snatch block to double pulling power when you are stuck deep.
• Let the motor cool between long pulls.

What to Know Before You Order

• This mount is for the 2016-2021 RZR Turbo and Turbo 4 family. The RZR Turbo S and Turbo R are not listed for this mount.
• The MA11906T plate takes the standard 3 x 4-7/8 in. pattern, so the kit comes with the 4,500 lb V3 standard spool.
• The extended wiring pack (two 12 ft leads, red and black, metric equivalent of 5 gauge) makes the long run to the Turbo battery cleaner.
• If you run an aftermarket bumper with a built-in winch plate, check with us before ordering this mount.
• The V3 rope color is your choice; black is the most low-key on a dark car, while red is the easiest to spot in the snow or the dark.

Viper V3 Winch Specifications

• Motor: 12V DC sealed permanent magnet
• Gear train: 3-stage planetary metal gears
• Brake: automatic, 100% load holding
• Clutch: sliding ring gear
• Wiring: 6 gauge; tie rods, fairlead hardware and motor terminals are stainless steel
• Sealing: IP67 waterproof rating per Moto Alliance; corrosion-resistant aluminum housing
• Wireless remote with its own frequency, plus a rocker handlebar switch and dash switch
• Manufacturer warranty: limited one year on the winch, 6 months on the rope
• V3 4,500 standard spool: 40 ft x 1/4 in. synthetic rope, 3.0 x 4.875 in. bolt pattern, 13.3 x 4.75 x 4.6 in., 17 lb

Fitment

Note: This mount takes the standard bolt pattern only, so this kit comes with the V3 4,500 lb standard spool winch.

Note: Moto Alliance recommends an extended wire kit to reach the battery on the RZR Turbo. You can add it in the options above.

What's in the Box

• Viper MA11906T winch mount plate with mounting hardware and instructions
• Viper V3 winch in your choice of rope color
• 40 ft x 1/4 in. synthetic rope, aluminum hawse fairlead and clevis hook
• Wireless remote, rocker handlebar switch and dash switch
• Contactor and wiring, hand saver strap, and installation hardware

Who It's For and What Pairs Well

This kit is for Turbo owners who dune, trail ride or explore solo and want a way out of a bad spot. Shop more RZR XP Turbo recovery gear and a RZR XP Turbo bumper to protect the winch.

Installation Notes

Install the MA11906T plate per the Moto Alliance PDF (shared with the MA11906 RZR mount) using the included hardware. Moto Alliance recommends extended wiring to reach the Turbo's battery, available as an add-on above. Route the remote receiver and contactor where they will not see direct water spray.

• Moto Alliance MA11906T winch mount installation instructions (PDF)