Several Polaris platforms share the same M12 sway bar link, so DRT built one hex bar kit that covers them all. It replaces OEM 1544048 on the RZR Turbo S front, General XP / Deluxe front and Xpedition rear, and OEM 1544333 on the RZR Pro XP front. The adjustable billet 6061-T6 links cut lateral flex and tighten up the handling.
Features and Benefits
- Multi-platform fit: replaces OEM 1544048 and 1544333.
- Hex bar body: a wrench surface for locking the links.
- Billet 6061-T6: CNC machined from aerospace-grade aluminum.
- PTFE-lined rod ends: 3-piece left/right-hand 5/8 in chromoly.
- Stainless spacers: 303 stainless rod end spacers.
- Mil-spec anodize: with laser-engraved branding.
Specifications, Materials and Finish
- Material: 6061-T6 billet aluminum
- Rod ends: 3-piece PTFE-lined 5/8 in chromoly, left and right hand thread
- Spacers: 303 stainless steel
- Finish: Military Specification anodize, laser engraved
- Hardware size: M12
- Replaces: OEM 1544048 / 1544333
- DRT part number: 20010SB06201
Fitment
| Year | Make | Model |
|---|---|---|
| See note | Polaris | RZR Turbo S / Turbo S 4 (front, OEM 1544048) |
| See note | Polaris | RZR Pro XP / Pro XP 4 (front, OEM 1544333) |
| See note | Polaris | General XP 1000 / Deluxe / 4 (front, OEM 1544048) |
| See note | Polaris | Xpedition (rear, OEM 1544048) |
Fitment note: DRT lists this kit by OEM part number, not by model year. Check that your link is 1544048 or 1544333 before ordering. DRT's storefront shows SKU 10010SB01201 on this product, but its description lists Product # 20010SB06201. We list it under 20010SB06201.
TRAILWORX Fitment Guarantee: fitment above is taken directly from DRT Motorsports. If you order the part listed for your vehicle and it does not fit, we will make it right with the correct part or a prepaid return, at no extra cost to you. Not sure about your trim? Send us your year, make, model and trim before you order and we will confirm it.
What's in the Box
- Pair of adjustable sway bar links
- PTFE-lined 5/8 in chromoly rod ends
- 303 stainless steel rod end spacers
Who It's For and What Pairs Well
For Turbo S, Pro XP, General XP and Xpedition owners. On a Pro XP, pair it with the rear DRT Polaris RZR Pro XP 2020+ Rear Sway Bar Link Kit (M10).
Installation Notes
Remove one factory sway bar link at a time with the vehicle on its wheels, set the DRT link to the OEM length, and bolt it in. Sway bar links work in pairs, so set both sides to the same length unless you are deliberately preloading the bar, and keep the vehicle on its wheels at ride height when you set them. After install, confirm every jam nut is tight and set with thread locker, and paint-mark each nut so movement is easy to spot. Inspect the jam nuts before every ride. Care: rinse sand and mud off the rod ends after rides and avoid blasting them with a pressure washer at close range. Check the rod ends for play at each service and replace any that feel loose.
Free shipping on this DRT Motorsports part from Trailworx UTV. DRT Motorsports designs and builds its UTV parts in Riverside, California.
- Manufacturer:
- DRT Motorsports
- source:
- drt_site
- drt_url:
- https://drtmotorsports.com/products/drt-rzr-xp-billet-aluminum-hex-bar-adjustable-sway-bar-link-kit-m12
- desc_status:
- written_2026-10-31
- price_basis:
- DRT retail 160.0; comp r1industriesoffroad.com 160.0
