A loaded Xpedition puts a lot of weight through the front sway bar, and the factory links flex under it. DRT's front kit replaces them with CNC-machined 6061-T6 hex bar links. They have hard anodizing and adjustable left/right-hand 5/8 in PTFE-lined chromoly rod ends, so the front handles better and flexes less.
Features and Benefits
- Better handling: reinforces the sway bar connection.
- Less lateral flex: holds up when driven hard.
- Billet 6061-T6: CNC machined hex bar.
- Adjustable: left- and right-hand thread rod ends.
- Direct fit: replaces the factory links.
Specifications, Materials and Finish
- Material: 6061-T6 aluminum hex bar, CNC machined
- Rod ends: 5/8 in PTFE-lined chromoly, left and right hand thread
- Spacers: 303 stainless steel misalignment spacers
- Finish: mil-spec hard anodize, laser engraved
- Position: front
- DRT part number: 20210SB01201 (patent pending)
Fitment
| Year | Make | Model |
|---|---|---|
| 2024+ | Polaris | Xpedition (2-seat, front) |
| 2024+ | Polaris | Xpedition 5 (4-seat, front) |
TRAILWORX Fitment Guarantee: fitment above is taken directly from DRT Motorsports. If you order the part listed for your vehicle and it does not fit, we will make it right with the correct part or a prepaid return, at no extra cost to you. Not sure about your trim? Send us your year, make, model and trim before you order and we will confirm it.
What's in the Box
- Pair of adjustable sway bar links
- PTFE-lined 5/8 in chromoly rod ends
- 303 stainless steel rod end spacers
Who It's For and What Pairs Well
For Xpedition owners. Pair them with the rear DRT Polaris Turbo S / Pro XP / General XP / Xpedition Sway Bar Link Kit (M12), which DRT lists for the Xpedition rear.
Installation Notes
Remove one factory front link at a time with the vehicle on its wheels, set the DRT link to the OEM length, and bolt it in. Sway bar links work in pairs, so set both sides to the same length unless you are deliberately preloading the bar, and keep the vehicle on its wheels at ride height when you set them. After install, confirm every jam nut is tight and set with thread locker, and paint-mark each nut so movement is easy to spot. Inspect the jam nuts before every ride. Care: rinse sand and mud off the rod ends after rides and avoid blasting them with a pressure washer at close range. Check the rod ends for play at each service and replace any that feel loose.
Free shipping on this DRT Motorsports part from Trailworx UTV. DRT Motorsports designs and builds its UTV parts in Riverside, California.
- Manufacturer:
- DRT Motorsports
- source:
- drt_site
- drt_url:
- https://drtmotorsports.com/products/drt-motorsports-front-sway-bar-link-kit-for-2024-polaris-xpedition
- desc_status:
- written_2026-10-31
- price_basis:
- DRT retail 180.0; comp r1industriesoffroad.com 180.0
