On the Xpedition, the factory Ride Command camera sits low on the tailgate. Add a rear bumper and the view gets shaded or blocked. DRT's relocation kit moves the OEM camera to the back of the DRT Polaris Xpedition Rear Bumper (P/N 20205RB01101), out and back from stock. That cuts obstruction and widens the view a lot, and an adjustable billet housing sets the angle.
Features and Benefits
- Wider, clearer view: less obstruction and shading.
- Adjustable housing: set the angle.
- Billet: 6061-T6, mil-grade anodize.
- Complete kit: housing, cushion clamps, factory Polaris plug.
- Stainless hardware: premium black.
Specifications, Materials and Finish
- Housing: aerospace-grade 6061-T6 billet aluminum, military-grade anodize
- Hardware: stainless steel, premium black
- Includes: cushion clamps to re-route wiring; factory Polaris plug for the tailgate hole
- Install: minor drilling to the bumper
- Requires: DRT Polaris Xpedition Rear Bumper P/N 20205RB01101
- DRT part number: 20205MB01201
Fitment
| Year | Make | Model |
|---|---|---|
| 2024+ | Polaris | Xpedition, 2 and 4-door, with DRT Rear Bumper 20205RB01101 |
Fitment note: Only for use with the DRT Xpedition Rear Bumper P/N 20205RB01101 (sold separately).
TRAILWORX Fitment Guarantee: fitment above is taken directly from DRT Motorsports. If you order the part listed for your vehicle and it does not fit, we will make it right with the correct part or a prepaid return, at no extra cost to you. Not sure about your trim? Send us your year, make, model and trim before you order and we will confirm it.
What's in the Box
- Billet adjustable camera housing
- Cushion clamps
- Factory Polaris tailgate plug
- Black stainless hardware
Who It's For and What Pairs Well
For Xpedition owners with the DRT rear bumper who rely on the backup camera.
Installation Notes
Move the OEM camera from the tailgate into the billet housing, mount the housing to the bumper with minor drilling, route the wiring with the cushion clamps away from the exhaust and hitch, plug the tailgate hole, and set the angle on the Ride Command screen. Recheck all hardware after the first ride and at each service interval. Care: wash anodized aluminum with mild soap and water. Avoid acidic or alkaline wheel cleaners, which can dull the finish.
Free shipping on this DRT Motorsports part from Trailworx UTV. DRT Motorsports designs and builds its UTV parts in Riverside, California.
- Manufacturer:
- DRT Motorsports
- source:
- drt_site
- drt_url:
- https://drtmotorsports.com/products/drt-polaris-2024-xpedition-adjustable-rear-camera-relocation-kit
- desc_status:
- written_2026-10-31
- price_basis:
- DRT retail 70.0; comp r1industriesoffroad.com 70.0
