Riding a CFMOTO UFORCE U10 Pro in the winter means cold hands, a frosty windshield, and short trips. The In-Dash Cab Heater fixes that by pulling heat from the engine's coolant, the same way a car heater works. It installs right into the dash, so it's out of your way and the hoses and wiring stay hidden for a clean-looking cab.
Features and Benefits
Real Heat from Your Engine
The heater uses hot coolant from your engine to make heat, just like an automotive heater. It's rated for 20,000 BTU at 135 CFM, enough to warm a closed cab on cold mornings. The fan has adjustable speeds, and the 360-degree adjustable vents let you aim heat right where you want it.
Built Into the Dash
Instead of hanging under the dash where it takes up legroom, the heater installs directly into the dash. That hides the hoses and cables and keeps the cab looking clean and factory.
Defrost Vents for a Clear Windshield
Defrost hoses and vents are included to clear ice and fog off your windshield quickly, so you can see the trail even on the coldest mornings.
Built to Handle Extremes
The heater uses high-grade radiator hoses rated from -40°F to 285°F. It's IP67 rated, so mud and rain won't ruin it. There's a built-in shutoff valve, and it draws 5.2 amps at 13.6 volts.
Warm Up Faster with Quick-Start Flow Valve and Idle Flow Pump
You can add two upgrades when ordering. The Quick-Start Flow Valve sends coolant straight to the heater core when the engine is cold, then routes it back through the radiator as it warms up. The Idle Flow Pump keeps coolant moving even at low speeds or idle, so your heat doesn't drop off while you're creeping along or sitting still.
| Quick-Start Flow Valve | Idle Flow Pump |
|---|---|
| Gets you heated air twice as fast | Warms up the heater in under 30 seconds |
| Diverts coolant to your heater core at low temps | Actively pumps coolant at idle to increase heater temps |
Get both for the most heat as quickly as possible when you're going slow or idling.
Fitment
| Year | Make | Model |
|---|---|---|
| 2025+ | CFMOTO | UFORCE U10 Pro |
| 2025+ | CFMOTO | UFORCE U10 Pro XL |
What's in the Box
- In-dash cab heater
- All tubing, ducting, adapters, hoses, vents, and clamps
- Defrost hoses and vents
- All necessary installation hardware and instructions
- Quick-Start Flow Valve and/or Idle Flow Pump (with those options only)
Who It's For and What Pairs Well
Anyone who plows, hunts, feeds livestock, or just rides through the winter in a U10 Pro will want one. A heater works best in a closed cab, so pair it with a front windshield like the glass windshield or scratch-resistant full windshield, plus the rear windshield and convertible doors. If you plow, take a look at the Plow Pro snow plow mount too.
Install Notes
Everything you need comes in the kit, including installation hardware and instructions. The heater mounts into the dash and connects to your engine's coolant system with the included hoses and adapters. Since you're working with coolant, plan on topping off and bleeding air from the system after install. If you added the Quick-Start Flow Valve or Idle Flow Pump, install them at the same time.
Notes
Warning: This product can impact machine operation. Customer and/or user is responsible for ensuring that this product is compatible with their machine as currently configured, properly installed, and understands any impact this product has or might have on the machine's operation.
California Proposition 65 Warning: This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.
