Weather changes fast, and a fixed windshield on a CFMOTO UFORCE U10 Pro means you're either too hot or too exposed. This Scratch-Resistant Flip Windshield gives you three positions: fully open for full airflow, cracked for a light breeze, or closed to keep rain, cold, and dust out. It's a simple, manual setup with no wiring, made in the USA.
Features and Benefits
Closed, Vented, or Fully Open
Flip it all the way open on hot days, crack it to a vent position when you want some air without a face full of dust, or close it up when it's cold or wet. It's designed for year-round riding, so weather doesn't have to cancel your plans.
Locking Gas Struts and Heavy-Duty Clamps
Locking gas struts hold the windshield firmly in whatever position you choose, even on the roughest trails. Heavy-duty clamps and a bulb seal keep it tight against the cage and hood, so it doesn't leak or rattle.
1/4" Polycarbonate
The windshield is cut from 1/4" polycarbonate. Compared to acrylic, poly is 25 times stronger, and compared to glass it's 250 times stronger. That's about as tough as windshield material gets for a UTV, and it means a branch or a rock kicked up by the machine ahead of you isn't going to put a crack across your view. Poly is also much lighter than glass, which keeps the flip action easy to work by hand.
XR Optic Hard Coating
Both sides get XR Optic Hard Coating for better scratch resistance, plus UV protection to keep it clear for years instead of turning hazy in the sun.
Made in the USA
The windshield is built in-house in Madison, Indiana, and it's backed by a 1-year manufacturer warranty.
Manual Flip or MaxDrive Power Flip?
A manual flip lets you open, vent, or close the windshield by hand with reliable, proven hardware and no wiring. The tradeoff is that it can be harder to operate at speed or on steep terrain. The MaxDrive Power Flip Windshield moves electrically from a dash switch and holds its position solidly, but it requires wiring and costs and weighs a bit more. Go manual if you want simple. Go power if you want push-button control on the move.
Fitment
| Year | Make | Model |
|---|---|---|
| 2025+ | CFMOTO | UFORCE U10 Pro |
| 2025+ | CFMOTO | UFORCE U10 Pro Highland |
| 2025+ | CFMOTO | UFORCE U10 Pro XL |
| 2025+ | CFMOTO | UFORCE U10 Pro XL Highland |
Note: Can be used with most soft or hard tops.
What's in the Box
- Scratch-resistant flip windshield (comes partially preassembled)
- Locking gas struts
- Heavy-duty clamps
- Bulb seal
Who It's For and What Pairs Well
If you want flexibility without wiring or extra cost, this is the one to get. Since it works with most tops, check out our U10 Pro roof tops to keep sun and rain off from above. If you need a fully closed cab for winter, add the rear windshield and convertible doors. Prefer glass? The glass windshield is the most scratch-resistant option.
Install Notes
The windshield comes partially preassembled, so installation is easier. Clamp it to the cage, set the bulb seal against the hood, and attach the gas struts. Test all three positions before your first ride to make sure the struts lock properly.
Notes
Warning: This product can impact machine operation. Customer and/or user is responsible for ensuring that this product is compatible with their machine as currently configured, properly installed, and understands any impact this product has or might have on the machine's operation.
California Proposition 65 Warning: This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.
