A full windshield on your CFMOTO UFORCE U10 Pro keeps out mud, cold, and debris, but on a hot day a closed front can make the cab stuffy. This Scratch-Resistant Vented Full Windshield solves that with two BreezeRite vents you can open, close, or set halfway. You get full protection when you need it and a breeze when you want it, without taking the windshield off.
Features and Benefits
Two BreezeRite Vents with Three Positions
The two BreezeRite vents let you control how much air comes into the cab. Set them open, closed, or half open. They're easy to adjust with one hand while you ride, they stay where you set them on bumpy ground, and they don't block your line of sight.
Shaped to Fit the U10 Pro
The windshield is shaped to match the U10 Pro's hood and cage, and robust clamps hold it tight. Together, they keep rain, wind, dust, and vibration out of your ride. A windshield that doesn't fit right will whistle, rattle, and let water run in along the edges. This one is made for this machine, so it sits flush and stays quiet even on washboard roads.
Vents and Bulb Seal Come Preinstalled
The BreezeRite vents and bulb seal are preinstalled, so you skip the fiddly part of the job. It shows up preassembled and ready to clamp on.
1/4" Polycarbonate
The material is quarter-inch polycarbonate, rated at 250 times the strength of glass and 25 times the strength of acrylic. Whatever job or trail you take your U10 Pro on, you can count on it to protect you.
XR Optic Hard Coating
XR Optic Hard Coating is applied to both sides for extra protection against scratches and abrasions, so the windshield stays crystal clear for years.
Made in the USA
Production happens in the USA, by a company that has turned out hundreds of thousands of UTV windshields over the last two decades. You also get a 1-year manufacturer warranty.
Vented or Non-Vented: Which One?
If you mostly ride in cool weather or just want the simplest setup, the non-vented full windshield does the job. If you ride through summer heat, work long days in the machine, or deal with a fogged-up windshield on humid mornings, the vents are worth it. Opening them halfway pulls in enough fresh air to keep the cab from getting stuffy and helps clear fog, while still keeping most of the dust and bugs out. Closing them seals the front back up when it gets cold or starts raining.
Fitment
| Year | Make | Model |
|---|---|---|
| 2025+ | CFMOTO | UFORCE U10 Pro |
| 2025+ | CFMOTO | UFORCE U10 Pro Highland |
| 2025+ | CFMOTO | UFORCE U10 Pro XL |
| 2025+ | CFMOTO | UFORCE U10 Pro XL Highland |
Note: Can be used with soft or hard tops.
What's in the Box
- 1/4" polycarbonate vented full windshield with (2) preinstalled BreezeRite vents
- Preinstalled bulb seal
- Clamps and all hardware for installation
Who It's For and What Pairs Well
This is the right pick if you ride in all kinds of weather and want airflow control without the cost or wiring of a power flip. Compare it to the non-vented scratch-resistant full windshield and the flip windshield to see which fits your riding. Pair it with the rear windshield to keep dust out, and since it works with soft or hard tops, check our U10 Pro roof tops.
Install Notes
Because the vents and bulb seal are preinstalled, all you have to do is clamp the windshield to your U10 Pro with the included hardware. It's one of the quicker windshield installs you'll do.
