Low sun into the cab is tiring, and in dust it is dangerous. DRT's Universal Sun Visor Set shields the driver and passenger with 30% tinted, abrasion-resistant polycarbonate held in billet 6061-T6 hardware. It mounts to the cage crossbar with DRT's thin-profile clamps. Dual pivots keep each visor from tilting out of position, and the visors fold into or out of the vehicle.
Features and Benefits
- Sold as a pair: driver and passenger; 4 clamps needed.
- Clamp sizes: 1.50, 1.75, 1.875 and 2.00 in round tube.
- Tinted shield: 30% tint, 14 x 6 in, 0.250 in thick.
- Stays put: dual pivots.
- Customizable: laser-cut contrast plates.
Specifications, Materials and Finish
- Shield: 30% tinted abrasion-resistant polycarbonate, 14 x 6 in, 0.250 in thick
- Billet parts: machined 6061-T6 aluminum, mil-spec anodize
- Mounting: DRT thin-profile cage clamps, 4 per set (2 per side)
- Options: no clamps, or 1.50 / 1.75 / 1.875 / 2.00 in clamps
- DRT part number: 10005SV01201 (K1-K4 with clamps)
Fitment
| Year | Make | Model |
|---|---|---|
| Universal | Most makes | 2- and 4-door side-by-sides |
Fitment note: Pick the clamp size that matches your cage tube outside diameter (1.50, 1.75, 1.875 or 2.00 in). Measure the tube with calipers if you are not sure. The no-clamp option needs 4 DRT clamps purchased separately.
TRAILWORX Fitment Guarantee: fitment above is taken directly from DRT Motorsports. If you order the part listed for your vehicle and it does not fit, we will make it right with the correct part or a prepaid return, at no extra cost to you. Not sure about your trim? Send us your year, make, model and trim before you order and we will confirm it.
What's in the Box
- Sun visors (pair)
- Billet mounting hardware
- DRT clamps (4) on clamp options
Who It's For and What Pairs Well
For riders heading into the sun at dawn and dusk. Fits most cages with a front crossbar.
Installation Notes
Clamp the visors to the front crossbar, adjust the pivots so they hold position, and check that they clear helmets and the windshield. Care: clean the polycarbonate with mild soap, water and a soft cloth only. Ammonia glass cleaners and paper towels haze and scratch it.
Free shipping on this DRT Motorsports part from Trailworx UTV. DRT Motorsports designs and builds its UTV parts in Riverside, California.
- Manufacturer:
- DRT Motorsports
- source:
- drt_site
- drt_url:
- https://drtmotorsports.com/products/drt-universal-sun-visor-set
- desc_status:
- written_2026-10-31
- price_basis:
- DRT retail 155.0; comp r1industriesoffroad.com 155.0
