Can-Am Commander Motobatt AGM Battery Replacement, 21 Ah / 320 CCA, 20% More Than OEM, Commander 800, 1000 & 1000R

The Commander is a do-everything machine, and it needs a battery that can keep up. This Motobatt AGM replacement is rated at 21 amp-hours and 320 cold-cranking amps, about 20% more than the OEM battery. That gives you stronger starts in cold weather and more capacity for the lights, winch and radios that Commander owners tend to run.

Built Tougher

• 21 Ah and 320 CCA, roughly 20% more than stock.
• Heavy-duty lead-calcium grids for strength and long life.
• AGM separators that cushion the plates against vibration on rough roads and trails.
• Multi-terminal design for easy accessory connections without stacking wires.
• Factory activated and sealed. Check the charge and install.
• 12-month full replacement warranty from Motobatt.

Specs

• Voltage: 12 V
• Capacity: 21 Ah
• Cold-cranking amps: 320 CCA
• Dimensions: 6.89" L x 3.43" W x 6.10" H
• Replaces OEM part numbers 715900316, 515175642, 410922990 and 410301203

Made for Working Machines

Commanders often pull double duty. They haul gear around the property during the week and hit the trails on the weekend. That means a lot of short trips, lots of starts and plenty of accessories. Many owners run a plow or winch, work lights and a radio, and some add a cab enclosure with a heater. All of that puts a lot of demand on the battery. The extra capacity of this Motobatt gives you a bigger cushion, so a long winch pull or an hour of idling with the lights on won't leave you stranded.

Keep It Healthy

• Keep the terminals clean and tight. Corrosion and loose cables cause hard starts.
• Use a battery maintainer if the Commander sits for more than a couple of weeks.
• Let the engine run a while after heavy winching so the charging system can catch up.

Fitment

Replaces OEM Part #: 715900316, 515175642, 410922990, 410301203

Fits 2011-2020 Commander 800 and 1000, plus 2021 and newer Commander 1000R DPS, XT, XTP and Commander MAX 1000R DPS and XT models.

In the Box

• Motobatt 12 V AGM battery, factory activated

Who It's For

Commander owners replacing a weak or failed battery, and anyone adding electrical load like a plow, winch, cab heater or sound system. Browse more Can-Am Commander electrical parts and Commander sound systems.

Install Notes

Make sure the new battery is charged. Disconnect negative first, then positive, and lift out the old battery. Install the Motobatt, connect positive first and negative last, and tighten the hold-down. Take the old battery to a recycling center.