The Polaris General is half trail machine and half workhorse, and that means it often carries a winch, light bars, a stereo and sometimes a full cab. A tired battery can't keep up with all that. This Motobatt AGM replacement packs 54 amp-hours and 585 cold-cranking amps, about 20% more than the OEM battery, so your General fires right up and keeps everything running.
Built Stronger Than Stock
- 54 Ah and 585 CCA, roughly 20% more capacity and cranking power than OEM.
- Heavy-duty lead-calcium grids for durable plates and a longer life.
- AGM separators cushion the internals against vibration and impacts on rough trails.
- Multi-terminal design adds extra connection points for accessories.
- Factory activated and sealed. Check the charge, install and go.
- 12-month full replacement warranty from Motobatt.
Specs
- Voltage: 12 V
- Capacity: 54 Ah
- Cold-cranking amps: 585 CCA
- Dimensions: 7.73" L x 6.50" W x 7.01" H
- Replaces Polaris OEM part numbers 4014132-P, 4012864, 4014043 and 4014132
Fitment
Replaces OEM Part #: 4014132-P, 4012864, 4014043, 4014132
| Year | Make | Model |
|---|---|---|
| 2016+ | Polaris | General 1000 |
| 2017+ | Polaris | General 1000 4 |
| 2021+ | Polaris | General XP 1000 |
| 2021+ | Polaris | General XP4 1000 |
Fits the General 1000 (2016+), General 4 1000 (2017+), and the General XP 1000 and XP 4 1000 (2021+).
In the Box
- Motobatt 12 V AGM battery, factory activated
Who It's For
General owners replacing a worn-out battery, and anyone running a winch, plow, sound system, light bars or a cab heater. The extra capacity gives you more time to run accessories with the engine off without risking a no-start. Browse more Polaris General electrical parts.
Accessory-Heavy Builds
A General with a full sound system, a winch and a few light bars can draw a lot of current, especially at camp or while idling. A high-capacity AGM battery is the foundation of a reliable electrical system. If you're adding a big amplifier or several accessories, keep the terminals tight and clean, and consider a battery maintainer when the machine sits for long periods.
Install Notes
Charge the battery first. Disconnect the negative cable and then the positive, and remove the old battery. Set the Motobatt in place, connect positive first and negative last, and secure the hold-down. Recycle the old battery properly.
- source:
- superatv
- satv_url:
- https://www.superatv.com/polaris-general-motobatt-battery-replacement
- desc_status:
- written_2026-10-31
