DRT's Race Series XD set is its strongest radius rod option for the Maverick R. It is a complete replacement set machined from 7075-T6 billet, the higher-strength aluminum alloy, with PTFE-lined 3/4 in chromoly rod ends and Class 10.9 alloy steel hardware where the application needs it. Use it when repeated hard hits have bent or loosened the factory rods.
Why the Race Series XD
- 7075-T6 billet: higher-strength alloy for demanding use.
- On-car adjustment: left- and right-hand threaded rod ends.
- Hex bar center: a solid wrench surface for adjustment and lockup.
- Chromoly rod ends: PTFE-lined 3/4 in with 303 stainless misalignment spacers.
- Class 10.9 hardware: used where the application requires it.
Specifications, Materials and Finish
- Material: CNC-machined 7075-T6 billet aluminum
- Rod ends: PTFE-lined 3/4 in chromoly, left and right hand thread
- Spacers: 303 stainless steel misalignment spacers
- Hardware: Class 10.9 alloy steel where required
- Finish: mil-spec anodize, machined pockets, laser engraving
- DRT part number: 30010RR76201 (patent pending)
Fitment
| Year | Make | Model |
|---|---|---|
| 2024+ | Can-Am | Maverick R |
| 2024+ | Can-Am | Maverick R Max |
TRAILWORX Fitment Guarantee: fitment above is taken directly from DRT Motorsports. If you order the part listed for your vehicle and it does not fit, we will make it right with the correct part or a prepaid return, at no extra cost to you. Not sure about your trim? Send us your year, make, model and trim before you order and we will confirm it.
What's in the Box
- Complete radius rod replacement set
- Chromoly PTFE-lined 3/4 in rod ends
- 303 stainless steel misalignment spacers
- Class 10.9 hardware where required
Who It's For and What Pairs Well
For Maverick R racers and aggressive desert riders. If you want 6061-T6 at a lower price, see the DRT Can-Am Maverick R 2024+ Billet Hex Bar Radius Rod Set. Add the DRT Can-Am Maverick R 2024+ Billet 2-Piece Radius Rod Plate with Recovery Loop and DRT Can-Am Maverick R 2024-2025 Billet UHD 7075 Double Shear Toe Link Bracket Kit to strengthen the mounts.
Installation Notes
Copy each OEM rod length before you remove it and swap one rod at a time. After install, confirm every jam nut is tight and set with thread locker, and paint-mark each nut so movement is easy to spot. Inspect the jam nuts before every ride. Any change to radius rod or tie rod length changes camber or toe, so get a proper alignment after install and after any adjustment, then take a short test drive and recheck the hardware. Care: rinse sand and mud off the rod ends after rides and avoid blasting them with a pressure washer at close range. Check the rod ends for play at each service and replace any that feel loose.
Free shipping on this DRT Motorsports part from Trailworx UTV. DRT Motorsports designs and builds its UTV parts in Riverside, California.
- Manufacturer:
- DRT Motorsports
- source:
- drt_site
- drt_url:
- https://drtmotorsports.com/products/drt-motorsports-billet-aluminum-7075-xd-hex-bar-radius-rod-set-for-can-am-maverick-r
- desc_status:
- written_2026-10-31
- price_basis:
- DRT retail 1100.0; comp r1industriesoffroad.com 1100.0
