null

FREE SHIPPING ON MOST ORDERS OVER $199!

phone: 430-258-6189

Can-Am Maverick X3 Wilwood Front Big Brake Kit 2017-2023 - UTV6 6-Piston Calipers, 11.25" Rotors

$1,429.94 - $1,462.28
SKU:
EVP-7110870237230
Shipping:
  • Fast Shipping

  • Free Exchanges

  • Safe Payments

  • Top Notch Tech Support

A turbo X3 builds speed faster than the factory front brakes like to shed it, and after a few hard stops into a whoop section or down a long grade the pedal starts to feel soft. This Wilwood UTV6 front kit swaps the stock calipers and rotors for forged six-piston calipers clamping larger 11.25-inch floating steel rotors, so your Maverick X3 or X3 MAX stops harder and stays consistent lap after lap. It bolts to the factory disc spindle with lug-mounted rotors and is made in the USA by Wilwood.

Why the UTV6 Front Kit Stops an X3 Better

  • Six-piston forged calipers: Wilwood UTV6 calipers are forged aluminum and purpose-built for side-by-sides, giving more clamping force with less flex than the stock front calipers.
  • Differential-bore pistons: stainless pistons in 1.12 / 1.12 / 1.00 in. bores (2.77 sq. in. of piston area) spread the load evenly across the pad for better feel and more even pad wear.
  • Bigger, thicker rotors: 11.25 in. x 0.25 in. steel rotors are up to 20% larger in diameter than stock and thicker, so they hold more heat and resist warping.
  • Dynamic (floating) mount: the rotors float on their adapters, which cuts thermal stress and helps stop piston knockback when the suspension is getting hammered in rough terrain.
  • Fixed-mount calipers: the calipers bolt solid to a dedicated mounting bracket for a firmer, more predictable pedal.
  • Pick your look: standard kits come in black or red powder coat with plain-face or SRP drilled rotors; the Race kit uses gray Type III hard-anodized calipers.

Standard Kit vs. Race Kit

  • Standard Kit: black or red powder-coat UTV6 calipers with Wilwood BP-10 pads. Choose solid (plain face) or drilled rotors. A great fit for trail riders, dune riders and anyone who just wants the X3 to stop the way it should.
  • Race Kit: Type III hard-anodized gray calipers with Wilwood BP-28 high-friction pads and solid rotors. The Race Grade kits are also listed with steel mounting hats. Built for racers and aggressive drivers who lean on the brakes every corner.

Front Kit Specifications (per Wilwood)

  • Kit: Wilwood UTV6 front brake kit, base part numbers 140-16628 (standard) and 140-17040 (Race)
  • Spindle type: factory disc spindle
  • Mount type: lug-drive, dynamic mount rotors (8-lug)
  • Calipers: UTV6, 6 piston, forged aluminum, stainless pistons
  • Piston bores: 1.12 / 1.12 / 1.00 in.; piston area 2.77 sq. in.
  • Brake pad plate: 7812; pad area 6.36 sq. in.
  • Pads: BP-10 (standard kits), BP-28 (Race kit)
  • Rotors: 11.25 in. diameter x 0.25 in. thick steel, black electro coat, plain face or SRP drilled
  • Minimum wheel size: 15 in. per Wilwood. Some 14 in. wheels may also clear, so check the wheel clearance diagram before you order.

Fitment

YearMakeModel
2018Can-AmMaverick X3 900 HO
2021-2023Can-AmMaverick X3 DS Turbo
2020-2021Can-AmMaverick X3 DS Turbo R
2022-2023Can-AmMaverick X3 DS Turbo RR
2021-2023Can-AmMaverick X3 MAX DS Turbo
2020-2021Can-AmMaverick X3 MAX DS Turbo R
2022-2023Can-AmMaverick X3 MAX DS Turbo RR
2020-2021Can-AmMaverick X3 MAX RS Turbo R
2022-2023Can-AmMaverick X3 MAX RS Turbo RR
2018-2020Can-AmMaverick X3 MAX Turbo
2017-2019Can-AmMaverick X3 MAX Turbo R
2017-2019Can-AmMaverick X3 MAX X ds Turbo R
2020-2023Can-AmMaverick X3 MAX X ds Turbo RR
2020-2023Can-AmMaverick X3 MAX X mr Turbo RR
2017-2019Can-AmMaverick X3 MAX X rs Turbo R
2020-2023Can-AmMaverick X3 MAX X rs Turbo RR
2021-2023Can-AmMaverick X3 MAX X rs Turbo RR Smart-Shox
2020-2021Can-AmMaverick X3 RS Turbo R
2022-2023Can-AmMaverick X3 RS Turbo RR
2018-2020Can-AmMaverick X3 Turbo
2017-2019Can-AmMaverick X3 Turbo R
2017-2019Can-AmMaverick X3 X ds Turbo R
2020-2023Can-AmMaverick X3 X ds Turbo RR
2018-2021Can-AmMaverick X3 X mr Turbo
2018-2019Can-AmMaverick X3 X mr Turbo R
2020-2021Can-AmMaverick X3 X mr Turbo RR
2022-2023Can-AmMaverick X3 X mr Turbo RR 64
2022-2023Can-AmMaverick X3 X mr Turbo RR 72
2018-2021Can-AmMaverick X3 X rc Turbo
2018-2019Can-AmMaverick X3 X rc Turbo R
2020-2021Can-AmMaverick X3 X rc Turbo RR
2022-2023Can-AmMaverick X3 X rc Turbo RR 64
2022-2023Can-AmMaverick X3 X rc Turbo RR 72
2017-2019Can-AmMaverick X3 X rs Turbo R
2020-2023Can-AmMaverick X3 X rs Turbo RR
2021-2023Can-AmMaverick X3 X rs Turbo RR Smart-Shox

Note: Wilwood designs this kit for factory, unmodified front ends. If you run aftermarket hubs, spindles, long-travel suspension or non-stock wheels, the installer must check clearance through full suspension travel.

What's in the Box

  • Two Wilwood UTV6 six-piston calipers (left and right) in your chosen finish
  • Two 11.25 in. dynamic-mount steel rotors (plain face or SRP drilled) with rotor adapters and adapter rings
  • Two caliper mounting brackets with bolts, washers and cotter pins
  • One axle set of Wilwood brake pads (BP-10 standard or BP-28 Race)
  • Banjo bolts and copper crush washers
  • Printed Wilwood installation instructions (DS-1488)

Who It's For and What Pairs Well

This kit is for Maverick X3 and X3 MAX owners who have added power, bigger tires or a long-travel setup and want front brakes that keep up. Wilwood builds matched front and rear UTV kits, so for balanced braking pair it with the Wilwood rear big brake kit for the Maverick X3. Check your rims against the clearance diagram, or browse Maverick X3 wheels and wheel spacers if you need 15 in. or larger. Wilwood recommends flushing with a high-temperature fluid such as their 570 or EXP 600 Plus; we also carry racing DOT 4 UTV brake fluid. Shopping other options? Compare the EVP.MOde Maverick X3 big brake kit, or see all Can-Am Maverick X3 brake parts and Maverick X3 parts. Want both ends at once? The Wilwood front and rear big brake kit for the Maverick X3 bundles this kit with the matching UTV4 rear kit in one order.

Installation Notes

Installation should be done by someone experienced with disc brakes. Wilwood notes that the casting line on the lower caliper mounting tab of the upright may need a little grinding so the new caliper sits flush without binding; take off only what is needed. The kit works with the stock master cylinder, but it does not include brake flex lines, and changing brakes can shift front-to-rear brake bias, so test before riding. After install, bleed the system, check for leaks, and bed in the pads following the procedure in the Wilwood instructions. Do not ride on untested brakes. Wilwood tech support: (805) 388-1188.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov (applies to brake pads only, per Wilwood).

source:
evp
evp_url:
https://evopowersports.com/products/wilwood-front-brake-kit-for-can-am-maverick-x3
desc_status:
written_2026-10-30
Manufacturer:
Wilwood
What Our Customers Are Saying
★★★★★

Fits flush all the way around, no gap at the top edge like the last aftermarket one I tried

Jace C.Yamaha Wolverine Full Windshield
★★★★★

Full enclosure held up through a week of rain camping, no leaks anywhere, seams are sealed well

Kyle C.Honda Talon Full Cab Enclosure
★★★★☆

Does the job well, just wish the mounting instructions had better diagrams

Grant C.Yamaha Viking Snow Plow Kit
★★★★★

Optically clear, zero waviness looking through it even at highway speeds. Seals up tight, no whistling

Corey N.Yamaha Wolverine Full Windshield
★★★★★

These doors are night and day compared to stock plastic. My kids stopped complaining about mud getting in

Zach G.CF Moto U10 Pro Convertible Full Hard Door Kit
★★★★☆

Cuts dust down a good bit, still get some coming through around the back window seam on real dusty days

Dean J.Polaris Ranger Cab Enclosure
★★★☆☆

Works but the fan is louder than I'd like on the high setting

Heath J.CF Moto Cab Heater Kit
★★★★★

Install video on youtube made this a 45 min job. Fit is tight, no wind noise at highway speed either

Travis K.CF Moto U10 Pro Convertible Full Hard Door Kit
★★★☆☆

Took longer to figure out the install than I expected, directions could be better but it works

Derek S.Polaris Ranger Cab Enclosure
★★★★★

This is the AJK bumper Trailworx pointed me to when the EMP one I wanted was backordered, glad they did, quality is great

Adam T.AJK Offroad Kawasaki Ridge Rear Bumper
★★★★★

Easy clamp-on install, no tools needed, and they fold in nice when trailering

Blake C.Can-Am Commander Side Mirrors
★★★★★

Ordered this after my stock bumper got wrecked, fit was spot on and paint matches close enough you can't tell

Kevin B.CF Moto Uforce 1000 Rear Bumper