Upgrading only one end of an X3's brakes fixes half the problem. This complete Wilwood package puts the six-piston UTV6 kit on the front and the four-piston UTV4 kit on the rear, so all four corners get forged fixed calipers and bigger 11.25-inch floating steel rotors at once. Your Maverick X3 or X3 MAX gets matched calipers, rotors and pads front to back, with one color and rotor choice that carries across the whole car. Both kits bolt to the stock spindles and rear uprights with lug-drive rotors, and both are made in the USA by Wilwood.
Why Do Both Axles Together
- A matched system: Wilwood designs the UTV6 front and UTV4 rear kits as a pair, so caliper sizing, rotor size and pad compound are matched across the car.
- Four forged fixed calipers: forged aluminum, side-by-side-specific calipers with stainless differential-bore pistons give more clamping force with less flex at every wheel.
- Four 11.25 in. floating rotors: 0.25 in. thick steel rotors, up to 20% larger in diameter than stock, hold more heat, resist warping, and reduce piston knockback over rough ground.
- One pad size for the whole car: front and rear calipers share the 7812 pad plate, so one style of spare pad covers both axles.
- One look all around: every option matches front and rear: black or red calipers with solid or drilled rotors, or gray anodized Race calipers.
- One bleed, one bed-in: doing both ends at once means you flush and bleed the system and bed in the pads only once.
Pick Your Configuration
- Standard Kit (black or red, solid or drilled rotors): powder-coat calipers with Wilwood BP-10 pads on both axles. Ideal for fast trail riding, dunes and anyone carrying passengers or gear.
- Race Kit (gray anodized, solid rotors): Type III hard-anodized calipers with Wilwood BP-28 high-friction pads front and rear. The Race Grade kits are also listed with steel mounting hats. Made for racing and drivers who brake late and hard.
Front Axle Specifications (UTV6, per Wilwood)
- Front kit: Wilwood UTV6, base part numbers 140-16628 (standard) and 140-17040 (Race)
- Spindle type: factory disc spindle
- Mount type: lug-drive, dynamic mount rotors (8-lug)
- Calipers: UTV6, 6 piston, forged aluminum, stainless pistons
- Piston bores: 1.12 / 1.12 / 1.00 in.; piston area 2.77 sq. in.
- Brake pad plate: 7812; pad area 6.36 sq. in.
- Pads: BP-10 (standard kits), BP-28 (Race kit)
- Rotors: 11.25 in. diameter x 0.25 in. thick steel, black electro coat, plain face or SRP drilled
Rear Axle Specifications (UTV4, per Wilwood)
- Rear kit: Wilwood UTV4, base part numbers 140-16629 (standard) and 140-17041 (Race)
- Rear end: OEM axle, 0.00 in. offset
- Mount type: lug-drive, dynamic mount rotors (8-lug)
- Calipers: UTV4, 4 piston, forged aluminum, stainless pistons
- Piston bores: 1.12 / 1.12 in.; piston area 1.98 sq. in.
- Brake pad plate: 7812; pad area 6.36 sq. in.
- Pads: BP-10 (standard kits), BP-28 (Race kit)
- Rotors: 11.25 in. diameter x 0.25 in. thick steel, black electro coat, plain face or SRP drilled
- Minimum wheel size (front and rear): 15 in. per Wilwood. Some 14 in. wheels may also clear; check both wheel clearance diagrams before you order.
Fitment
| Year | Make | Model |
|---|---|---|
| 2018 | Can-Am | Maverick X3 900 HO |
| 2021-2023 | Can-Am | Maverick X3 DS Turbo |
| 2020-2021 | Can-Am | Maverick X3 DS Turbo R |
| 2022-2023 | Can-Am | Maverick X3 DS Turbo RR |
| 2021-2023 | Can-Am | Maverick X3 MAX DS Turbo |
| 2020-2021 | Can-Am | Maverick X3 MAX DS Turbo R |
| 2022-2023 | Can-Am | Maverick X3 MAX DS Turbo RR |
| 2020-2021 | Can-Am | Maverick X3 MAX RS Turbo R |
| 2022-2023 | Can-Am | Maverick X3 MAX RS Turbo RR |
| 2018-2020 | Can-Am | Maverick X3 MAX Turbo |
| 2017-2019 | Can-Am | Maverick X3 MAX Turbo R |
| 2017-2019 | Can-Am | Maverick X3 MAX X ds Turbo R |
| 2020-2023 | Can-Am | Maverick X3 MAX X ds Turbo RR |
| 2020-2023 | Can-Am | Maverick X3 MAX X mr Turbo RR |
| 2017-2019 | Can-Am | Maverick X3 MAX X rs Turbo R |
| 2020-2023 | Can-Am | Maverick X3 MAX X rs Turbo RR |
| 2021-2023 | Can-Am | Maverick X3 MAX X rs Turbo RR Smart-Shox |
| 2020-2021 | Can-Am | Maverick X3 RS Turbo R |
| 2022-2023 | Can-Am | Maverick X3 RS Turbo RR |
| 2018-2020 | Can-Am | Maverick X3 Turbo |
| 2017-2019 | Can-Am | Maverick X3 Turbo R |
| 2017-2019 | Can-Am | Maverick X3 X ds Turbo R |
| 2020-2023 | Can-Am | Maverick X3 X ds Turbo RR |
| 2018-2021 | Can-Am | Maverick X3 X mr Turbo |
| 2018-2019 | Can-Am | Maverick X3 X mr Turbo R |
| 2020-2021 | Can-Am | Maverick X3 X mr Turbo RR |
| 2022-2023 | Can-Am | Maverick X3 X mr Turbo RR 64 |
| 2022-2023 | Can-Am | Maverick X3 X mr Turbo RR 72 |
| 2018-2021 | Can-Am | Maverick X3 X rc Turbo |
| 2018-2019 | Can-Am | Maverick X3 X rc Turbo R |
| 2020-2021 | Can-Am | Maverick X3 X rc Turbo RR |
| 2022-2023 | Can-Am | Maverick X3 X rc Turbo RR 64 |
| 2022-2023 | Can-Am | Maverick X3 X rc Turbo RR 72 |
| 2017-2019 | Can-Am | Maverick X3 X rs Turbo R |
| 2020-2023 | Can-Am | Maverick X3 X rs Turbo RR |
| 2021-2023 | Can-Am | Maverick X3 X rs Turbo RR Smart-Shox |
Note: Wilwood designs these kits for factory, unmodified vehicles. With aftermarket hubs, spindles, uprights, long-travel suspension or non-stock wheels, the installer must check clearance through full suspension travel at both axles.
What's in the Box
- Front (UTV6 kit): two six-piston calipers (left and right), two 11.25 in. dynamic-mount rotors with adapters and adapter rings, two caliper mounting brackets with bolts, washers and cotter pins, one axle set of pads, banjo bolts and copper crush washers, Wilwood DS-1488 instructions
- Rear (UTV4 kit): two four-piston calipers, two 11.25 in. dynamic-mount rotors with adapters and adapter rings, two caliper mounting brackets with bolts, washers and cotter pins, one axle set of pads, banjo bolts and copper crush washers, Wilwood DS-1489 instructions
- Calipers, rotor style and pads (BP-10 standard or BP-28 Race) match front and rear for the configuration you choose
Who It's For and Related Parts
This is the kit for X3 and X3 MAX owners who have added power, bigger tires, long travel or a lot of weight, and want the whole car to stop like it was built that way. Only need one end? Buy the Wilwood front big brake kit or the Wilwood rear big brake kit on its own. With four new calipers to bleed, have plenty of racing DOT 4 UTV brake fluid on hand, and check your rims or shop Maverick X3 wheels and spacers if you need 15 in. or larger. Compare the EVP.MOde X3 big brake kit, or browse every Can-Am Maverick X3 brake part and Maverick X3 part we carry.
Installation Notes
Have both kits installed by someone experienced with disc brakes, following Wilwood DS-1488 (front) and DS-1489 (rear) step by step, including the torque specs and thread locker callouts. On the front, Wilwood notes the casting line on the lower caliper tab of the upright may need light grinding so the caliper sits without binding. Brake flex lines are not included. The system runs on the stock master cylinder; because new brakes can shift bias, confirm the rear does not lock before the front. Bleed with a high-temperature fluid such as Wilwood 570 or EXP 600 Plus, check for leaks, and bed in all four corners before riding. Never ride on untested brakes. Wilwood tech support: (805) 388-1188.
- Wilwood DS-1488 Front Brake Kit Installation Instructions (PDF)
- Wilwood DS-1489 Rear Brake Kit Installation Instructions (PDF)
- Wilwood Front Kit Wheel Clearance Diagram
- Wilwood Warranty Information (PDF)
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov (applies to brake pads only, per Wilwood).
- source:
- evp
- evp_url:
- https://evopowersports.com/products/wilwood-front-brake-kit-for-can-am-maverick-x3
- evp_url_rear:
- https://evopowersports.com/products/wilwood-rear-brake-kit-for-can-am-maverick-x3
- desc_status:
- written_2026-10-30
- evp_skus:
- 3912010020+3912010026; 3912010023+3912010029; 3912010021+3912010027; 3912010022+3912010028; 3912010024+3912010025
- bundle_of:
- 34795 + 34796