null

FREE SHIPPING ON MOST ORDERS OVER $199!

phone: 430-258-6189

Can-Am Maverick X3 Wilwood Rear Big Brake Kit 2017-2023 - UTV4 4-Piston Calipers, 11.25" Rotors

$1,429.94 - $1,462.28
SKU:
EVP-7110907199534
Shipping:
  • Fast Shipping

  • Free Exchanges

  • Safe Payments

  • Top Notch Tech Support

The rear brakes on a Maverick X3 do a lot of the work keeping the car straight on steep descents and in tight, braking-into-a-slide corners, and the stock parts heat up fast once the car is built. Wilwood's UTV4 rear kit replaces them with forged four-piston fixed calipers and larger 11.25-inch floating steel rotors for more brake torque and less fade. It is the matched partner to Wilwood's UTV6 front kit, so you can upgrade both ends and keep the X3 balanced.

What the UTV4 Rear Kit Brings to Your X3

  • Four-piston forged calipers: UTV4 calipers are forged aluminum, designed for the side-by-side market, with stainless 1.12 in. pistons (1.98 sq. in. of piston area) for firm, even clamping.
  • Larger floating rotors: 11.25 in. x 0.25 in. dynamic-mount steel rotors, up to 20% bigger in diameter than stock and thicker, add brake torque and soak up more heat.
  • No more knockback: the floating rotor mount reduces thermal stress and helps keep the pistons from getting pushed back when the rear end is chattering over rocks and ruts.
  • Uses the OEM rear axle: lug-drive rotors and a bolt-on caliper bracket mount to the stock X3 rear upright and hub, with 0.00 in. axle offset per Wilwood.
  • Same pad size front and rear: the UTV4 uses the same 7812 pad plate (6.36 sq. in. of pad area) as the UTV6 front kit, which keeps spares simple.
  • Finish options: black or red powder coat with plain-face or SRP drilled rotors, or the Race kit with gray Type III hard-anodized calipers.

Choosing Your Rear Kit

  • Standard Kit: UTV4 calipers in black or red with Wilwood BP-10 pads, and your choice of solid or drilled rotors. Match the color to your front kit for a clean look through the wheels.
  • Race Kit: gray anodized UTV4 calipers, solid rotors and Wilwood BP-28 high-friction pads. The Race Grade kits are also listed with steel mounting hats. Choose this if you race, or ride hard enough to cook pads.

Rear Kit Specifications (per Wilwood)

  • Kit: Wilwood UTV4 rear brake kit, base part numbers 140-16629 (standard) and 140-17041 (Race)
  • Rear end: OEM axle, 0.00 in. offset
  • Mount type: lug-drive, dynamic mount rotors (8-lug)
  • Calipers: UTV4, 4 piston, forged aluminum, stainless pistons
  • Piston bores: 1.12 / 1.12 in.; piston area 1.98 sq. in.
  • Brake pad plate: 7812; pad area 6.36 sq. in.
  • Pads: BP-10 (standard kits), BP-28 (Race kit)
  • Rotors: 11.25 in. diameter x 0.25 in. thick steel, black electro coat, plain face or SRP drilled
  • Minimum wheel size: 15 in. per Wilwood. Some 14 in. wheels may also clear; check the wheel clearance diagram first.

Fitment

YearMakeModel
2018Can-AmMaverick X3 900 HO
2021-2023Can-AmMaverick X3 DS Turbo
2020-2021Can-AmMaverick X3 DS Turbo R
2022-2023Can-AmMaverick X3 DS Turbo RR
2021-2023Can-AmMaverick X3 MAX DS Turbo
2020-2021Can-AmMaverick X3 MAX DS Turbo R
2022-2023Can-AmMaverick X3 MAX DS Turbo RR
2020-2021Can-AmMaverick X3 MAX RS Turbo R
2022-2023Can-AmMaverick X3 MAX RS Turbo RR
2018-2020Can-AmMaverick X3 MAX Turbo
2017-2019Can-AmMaverick X3 MAX Turbo R
2017-2019Can-AmMaverick X3 MAX X ds Turbo R
2020-2023Can-AmMaverick X3 MAX X ds Turbo RR
2020-2023Can-AmMaverick X3 MAX X mr Turbo RR
2017-2019Can-AmMaverick X3 MAX X rs Turbo R
2020-2023Can-AmMaverick X3 MAX X rs Turbo RR
2021-2023Can-AmMaverick X3 MAX X rs Turbo RR Smart-Shox
2020-2021Can-AmMaverick X3 RS Turbo R
2022-2023Can-AmMaverick X3 RS Turbo RR
2018-2020Can-AmMaverick X3 Turbo
2017-2019Can-AmMaverick X3 Turbo R
2017-2019Can-AmMaverick X3 X ds Turbo R
2020-2023Can-AmMaverick X3 X ds Turbo RR
2018-2021Can-AmMaverick X3 X mr Turbo
2018-2019Can-AmMaverick X3 X mr Turbo R
2020-2021Can-AmMaverick X3 X mr Turbo RR
2022-2023Can-AmMaverick X3 X mr Turbo RR 64
2022-2023Can-AmMaverick X3 X mr Turbo RR 72
2018-2021Can-AmMaverick X3 X rc Turbo
2018-2019Can-AmMaverick X3 X rc Turbo R
2020-2021Can-AmMaverick X3 X rc Turbo RR
2022-2023Can-AmMaverick X3 X rc Turbo RR 64
2022-2023Can-AmMaverick X3 X rc Turbo RR 72
2017-2019Can-AmMaverick X3 X rs Turbo R
2020-2023Can-AmMaverick X3 X rs Turbo RR
2021-2023Can-AmMaverick X3 X rs Turbo RR Smart-Shox

Note: Wilwood designs this kit for factory, unmodified vehicles. With aftermarket hubs, uprights, long-travel suspension or wheels, the installer must verify clearance through full suspension travel.

What's in the Box

  • Two Wilwood UTV4 four-piston calipers in your chosen finish
  • Two 11.25 in. dynamic-mount steel rotors (plain face or SRP drilled) with rotor adapters and adapter rings
  • Two caliper mounting brackets with bolts, washers and cotter pins
  • One axle set of Wilwood brake pads (BP-10 standard or BP-28 Race)
  • Banjo bolts and copper crush washers
  • Printed Wilwood installation instructions (DS-1489)

Who It's For and What Pairs Well

Built for X3 and X3 MAX owners who tow, haul passengers on steep trails, or run a lot more power than stock. If you are upgrading the rear, the Wilwood front big brake kit for the Maverick X3 is the matched six-piston partner and makes the biggest difference when installed together. Make sure your wheels clear the calipers, or shop Maverick X3 wheels and spacers. Fresh racing DOT 4 UTV brake fluid is a smart add for the bleed. You can also compare the EVP.MOde X3 big brake kit or browse every Maverick X3 brake part we carry. Doing all four corners? Get the complete Wilwood front and rear X3 big brake kit, which pairs this rear kit with the UTV6 front kit in one listing.

Installation Notes

Wilwood recommends installation by someone experienced with disc brakes. Remove the rear wheels, calipers, hubs and rotors, then install the new rotor adapters, rotors, brackets and calipers following the DS-1489 instructions and torque specs. Flex lines are not included, and the kit runs on the stock master cylinder. Because new brakes can change front-to-rear bias, make sure the rear does not lock before the front. Bleed with a high-temperature fluid such as Wilwood 570 or EXP 600 Plus, check for leaks and bed in the pads before riding. Never ride on untested brakes. Wilwood tech support: (805) 388-1188.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov (applies to brake pads only, per Wilwood).

source:
evp
evp_url:
https://evopowersports.com/products/wilwood-rear-brake-kit-for-can-am-maverick-x3
desc_status:
written_2026-10-30
Manufacturer:
Wilwood
What Our Customers Are Saying
★★★★★

Fits flush all the way around, no gap at the top edge like the last aftermarket one I tried

Jace C.Yamaha Wolverine Full Windshield
★★★★★

Full enclosure held up through a week of rain camping, no leaks anywhere, seams are sealed well

Kyle C.Honda Talon Full Cab Enclosure
★★★★☆

Does the job well, just wish the mounting instructions had better diagrams

Grant C.Yamaha Viking Snow Plow Kit
★★★★★

Optically clear, zero waviness looking through it even at highway speeds. Seals up tight, no whistling

Corey N.Yamaha Wolverine Full Windshield
★★★★★

These doors are night and day compared to stock plastic. My kids stopped complaining about mud getting in

Zach G.CF Moto U10 Pro Convertible Full Hard Door Kit
★★★★☆

Cuts dust down a good bit, still get some coming through around the back window seam on real dusty days

Dean J.Polaris Ranger Cab Enclosure
★★★☆☆

Works but the fan is louder than I'd like on the high setting

Heath J.CF Moto Cab Heater Kit
★★★★★

Install video on youtube made this a 45 min job. Fit is tight, no wind noise at highway speed either

Travis K.CF Moto U10 Pro Convertible Full Hard Door Kit
★★★☆☆

Took longer to figure out the install than I expected, directions could be better but it works

Derek S.Polaris Ranger Cab Enclosure
★★★★★

This is the AJK bumper Trailworx pointed me to when the EMP one I wanted was backordered, glad they did, quality is great

Adam T.AJK Offroad Kawasaki Ridge Rear Bumper
★★★★★

Easy clamp-on install, no tools needed, and they fold in nice when trailering

Blake C.Can-Am Commander Side Mirrors
★★★★★

Ordered this after my stock bumper got wrecked, fit was spot on and paint matches close enough you can't tell

Kevin B.CF Moto Uforce 1000 Rear Bumper