The UForce U10 is CFMoto's newest full-size work machine, and Moto Alliance built a GEN II Firestorm heater for it. The 2024 redesign brought a new heater core that can push up to 18,000 BTU into the cab. Four vents keep the cab warm and the windshield free of frost, and the core stays hidden for a factory look.
U10 Highlights
- Made for the 2025-2026 CFMoto UForce U10.
- GEN II heater core, redesigned in 2024, rated up to 18,000 BTU.
- Four vents keep the cab warm and the windshield clear.
- Everything for the U10 install is in the box: brackets, hoses, clamps, fittings and wiring connectors.
U10 Tips
- Read all of the linked PDFs before starting.
- Defrost first on cold starts.
- Keep the valve shut in summer so no hot coolant runs through the cab.
Firestorm GEN II Specifications
- Heat output: up to 18,000 BTU from engine coolant at 0-125 CFM, from a heat exchanger Moto Alliance redesigned in 2024
- Adjustable temperature setting and fan speeds, with 360-degree louvers
- Built-in shutoff valve to close off coolant flow in warm weather
- High-grade radiator hose rated from -40 to 120 degrees C
- High-performance alloy Y connectors
- All installation hardware and instructions included
Fitment
| Year | Make | Model |
|---|---|---|
| 2025-2026 | CFMoto | UForce U10 |
Note: Moto Alliance lists this for the CFMoto UForce U10. We placed it with U10 Pro parts. Ask us about other U10 trims.
What's in the Box
- Firestorm GEN II heater unit with temperature and fan-speed controls
- Four cab vents, including defrost
- Mounting brackets made for the CFMoto UForce U10
- All hoses, stainless steel clamps and aluminum hose fittings
- Electrical connectors and accessories
- Installation hardware and instructions
Who It's For and What Pairs Well
This heater is for U10 owners using their machine for winter work and hunting. See U10 Pro interior accessories to finish the cab, and browse all U10 Pro cab heaters.
Installation Notes
Moto Alliance says the kit includes everything needed, so there are no extra trips to the hardware store: vehicle-specific brackets, all hoses, stainless steel clamps, aluminum hose fittings and electrical connectors. Moto Alliance provides several PDF documents for this kit, linked below. Refill and bleed the coolant after install, and check for leaks once the engine is hot.
- source:
- motoalliance
- ma_url:
- https://www.motoalliance.com/FIRESTORM-UTV-Cab-Heater-for-2025-2026-CF-Moto-U10.
- desc_status:
- written_2026-10-28
- ma_parts:
- HT_CU_471 $399.99
