The Polaris ACE is a fun little single-seater, but a weak battery can turn a ride into a push. Replace it with a Motobatt AGM battery rated at 16.4 amp-hours and 250 cold-cranking amps. It's sealed, factory activated and built to handle vibration, so your ACE starts reliably and stays that way.
Why It's a Smart Upgrade
- 16.4 Ah and 250 CCA for dependable starts, even on cool mornings.
- Heavy-duty lead-calcium grids for strong, long-lasting plates.
- AGM separators that protect the internals from trail vibration and impacts.
- Multi-terminal design for easy accessory wiring.
- Factory activated. Check the charge, install and ride.
- 12-month full replacement warranty from Motobatt.
Specs
- Voltage: 12 V
- Capacity: 16.4 Ah
- Cold-cranking amps: 250 CCA
- Dimensions: 5.31" L x 3.54" W x 6.61" H
- Replaces Polaris OEM part numbers 4010630, 4011138, 4140006, 4140007, 4140012 and 5432077
Fitment
Replaces OEM Part #: 4010630, 4011138, 4140006, 4140007, 4140012, 5432077
| Year | Make | Model |
|---|---|---|
| 2014-2016 | Polaris | Ace 325 |
| 2017-2019 | Polaris | Ace 500 |
| 2015-2019 | Polaris | Ace 570 |
Fits the 2014-2016 ACE 325, 2017-2019 ACE 500 and 2015-2019 ACE 570.
In the Box
- Motobatt 12 V AGM battery, factory activated
Who It's For
ACE owners with a dead or weak battery, and riders who've added a light bar, horn, radio or other electrical accessories. The ACE is often ridden by newer riders or used for quick trips, so a battery that starts every time makes it a lot more enjoyable. Browse more Polaris ACE electrical parts.
Make It Last
Short rides don't give the charging system much time to top off the battery, and machines like the ACE often sit between uses. A battery maintainer is the easiest way to keep this battery healthy. Check that your terminals are clean and snug, too. A loose cable can feel exactly like a dead battery. If your ACE sits through winter, keep it on a maintainer or remove the battery and store it somewhere cool and dry.
Install Notes
Make sure the battery is charged. Disconnect negative first, then positive, and remove the old battery. Install the Motobatt, connect positive and then negative, and secure the hold-down. Recycle the old battery at a parts store or recycling center.
- source:
- superatv
- satv_url:
- https://www.superatv.com/polaris-ace-motobatt-battery-replacement
- desc_status:
- written_2026-10-31
