The Ride Command rear camera on Pro Series RZRs sits where the bodywork gives you a halo in the image, and an aftermarket bumper can block it further. DRT's adjustable extension moves the camera out and back to cut that halo and widen the view a lot compared with stock. You also set the angle to the field of view you want. The factory camera snaps into a billet 6061 housing.
Features and Benefits
- Less halo, wider view: camera moves back from stock.
- Adjustable angle: pick your field of view.
- Bumper friendly: keeps the camera useful with aftermarket bumpers.
- Billet: 6061 aluminum, mil-grade anodize.
- Simple install: snap-in housing, adhesive gasket.
- Stainless hardware: DRT premium black.
Specifications, Materials and Finish
- Material: aerospace-grade 6061 billet aluminum
- Finish: military-grade anodize
- Hardware: stainless steel, premium black finish
- Includes: adhesive gasket
- Camera: uses factory Ride Command rear camera
- DRT part number: 20005MB01201
Fitment
| Year | Make | Model |
|---|---|---|
| 2020+ | Polaris | RZR Pro XP, 2 and 4-door |
| 2020+ | Polaris | RZR Pro R, 2 and 4-door |
| 2020+ | Polaris | RZR Turbo R, 2 and 4-door |
Fitment note: DRT lists 2020+ for all three. The Pro R and Turbo R began in 2022. Requires the factory Ride Command rear camera.
TRAILWORX Fitment Guarantee: fitment above is taken directly from DRT Motorsports. If you order the part listed for your vehicle and it does not fit, we will make it right with the correct part or a prepaid return, at no extra cost to you. Not sure about your trim? Send us your year, make, model and trim before you order and we will confirm it.
What's in the Box
- Billet adjustable camera housing/extension
- Adhesive gasket
- Black stainless hardware
Who It's For and What Pairs Well
For Pro Series owners who use the backup camera, especially with an aftermarket rear bumper.
Installation Notes
Remove the camera from the stock location, snap it into the billet housing with the gasket, mount the extension in place of the stock location, and set the angle while you watch the Ride Command screen. Secure the camera lead so it cannot rub. Recheck all hardware after the first ride and at each service interval. Care: wash anodized aluminum with mild soap and water. Avoid acidic or alkaline wheel cleaners, which can dull the finish.
Free shipping on this DRT Motorsports part from Trailworx UTV. DRT Motorsports designs and builds its UTV parts in Riverside, California.
- Manufacturer:
- DRT Motorsports
- source:
- drt_site
- drt_url:
- https://drtmotorsports.com/products/drt-polaris-pro-series-adjustable-rear-camera-extension
- desc_status:
- written_2026-10-31
- price_basis:
- DRT retail 60.0; comp r1industriesoffroad.com 60.0
